Fiat TL 70 (DT) vs VALMET 465 (465-4)

12 material differences

Tractor one

from 1998

No measured PTO figure

Tractor two

1993–1997

No measured PTO figure

Which should you choose?

Read our verdict on the TL 70 (DT) and the 465 (465-4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat TL 70 (DT) and VALMET 465 (465-4), field by field
Field	TL 70 (DT)	465 (465-4)	Gap
Engine
Engine power, claimed claimed	64.1 hp	69.1 hp	+8% 465 (465-4)
Engine declared	New Holland-Iveco 8045.06 R	VALMET 320 DS	differs
Displacement declared	3.61 L	3.30 L	+10% TL 70 (DT)
Maximum torque declared	170 lb·ft · 231 N·m	192 lb·ft · 260 N·m	+13% 465 (465-4)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	dry LuK double clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	11.8 gpm · 44.5 L/min	14.5 gpm · 55.0 L/min	+24% 465 (465-4)
Pressure declared	2,103 psi · 145 bar	2,901 psi · 200 bar	+38% 465 (465-4)
Three-point lift at ends declared	6,261 lb · 2,840 kg	5,688 lb · 2,580 kg	+10% TL 70 (DT)
Rear PTO speeds declared	540/540E/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	9,149 lb · 4,150 kg	6,217 lb · 2,820 kg	+47% TL 70 (DT)
Maximum permissible mass declared	11,464 lb · 5,200 kg	—	—
Wheelbase declared	92.2 in · 2,342 mm	83.1 in · 2,112 mm	+11% TL 70 (DT)
Length declared	168.5 in · 4,280 mm	146.1 in · 3,710 mm	+15% TL 70 (DT)
Width declared	78.9 in · 2,005 mm	79.9 in · 2,030 mm	—
Height declared	97.4 in · 2,475 mm	102.6 in · 2,605 mm	—
Ground clearance declared	15.0 in · 380 mm	15.9 in · 405 mm	+7% 465 (465-4)
Turning radius, braked declared	12.0 ft · 3.65 m	11.5 ft · 3.50 m	—
Fuel tank declared	121.5 qt · 115.0 L	77.1 qt · 73.0 L	+58% TL 70 (DT)

Source

Source