6 material differences · fewer than 12

Tractor oneFiat TL 70 (DT)from 1998No measured PTO figureTractor twoNew Holland 4835 (A)1996–1998No measured PTO figure

Which should you choose?

Read our verdict on the TL 70 (DT) and the 4835 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 13 fields identical or within 5%, which is not counted as material

Fiat TL 70 (DT) and New Holland 4835 (A), field by field
Field	TL 70 (DT)	4835 (A)	Gap
Engine
Engine power, claimed claimed	64.1 hp	64.1 hp	—
Engine declared	New Holland-Iveco 8045.06 R	Iveco 8045.06	differs
Displacement declared	3.61 L	3.61 L	—
Maximum torque declared	170 lb·ft · 231 N·m	146 lb·ft · 198 N·m	+17% TL 70 (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	dry LuK double clutch	—
Hydraulics & hitch
Pump flow declared	11.8 gpm · 44.5 L/min	11.8 gpm · 44.5 L/min	—
Pressure declared	2,103 psi · 145 bar	2,103 psi · 145 bar	—
Three-point lift, at the coupling points declared	6,261 lb · 2,840 kg	6,393 lb · 2,900 kg	—
Rear PTO speeds declared	540/540E/1000 rpm	540/540E/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,149 lb · 4,150 kg	8,620 lb · 3,910 kg	+6% TL 70 (DT)
Maximum permissible mass declared	11,464 lb · 5,200 kg	11,464 lb · 5,200 kg	—
Wheelbase declared	92.2 in · 2,342 mm	92.2 in · 2,342 mm	—
Length declared	168.5 in · 4,280 mm	153.9 in · 3,910 mm	+9% TL 70 (DT)
Width declared	78.9–102.8 in · 2,005–2,610 mm	83.5–99.2 in · 2,120–2,520 mm	differs
Height, over the cab declared	97.4 in · 2,475 mm	98.4 in · 2,500 mm	—
Ground clearance declared	15.0 in · 380 mm	18.9 in · 480 mm	+26% 4835 (A)
Turning radius, braked declared	12.0 ft · 3.65 m	12.4 ft · 3.79 m	—
Fuel tank declared	121.5 qt · 115.0 L	121.5 qt · 115.0 L	—

Source

Source