Fiat TL 70 (DT) vs Massey Ferguson MF 4325 (A)

11 material differences · fewer than 12

Tractor one

from 1998

No measured PTO figure

Tractor two

2001–2003

No measured PTO figure

Which should you choose?

Read our verdict on the TL 70 (DT) and the MF 4325 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat TL 70 (DT) and Massey Ferguson MF 4325 (A), field by field
Field	TL 70 (DT)	MF 4325 (A)	Gap
Engine
Engine power, claimed claimed	64.1 hp	66.1 hp	—
Engine declared	New Holland-Iveco 8045.06 R	Perkins 1004.40	differs
Displacement declared	3.61 L	3.99 L	+10% MF 4325 (A)
Maximum torque declared	170 lb·ft · 231 N·m	193 lb·ft · 261 N·m	+13% MF 4325 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Dry LuK double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	11.8 gpm · 44.5 L/min	—	—
Pressure declared	2,103 psi · 145 bar	2,031 psi · 140 bar	—
Three-point lift at ends declared	6,261 lb · 2,840 kg	6,744 lb · 3,059 kg	+8% MF 4325 (A)
Rear PTO speeds declared	540/540E/1000 rpm	540/1000/540E rpm	differs
Weight & dimensions
Unladen weight declared	9,149 lb · 4,150 kg	6,936 lb · 3,146 kg	+32% TL 70 (DT)
Maximum permissible mass declared	11,464 lb · 5,200 kg	14,330 lb · 6,500 kg	+25% MF 4325 (A)
Wheelbase declared	92.2 in · 2,342 mm	92.5 in · 2,350 mm	—
Length declared	168.5 in · 4,280 mm	151.6 in · 3,850 mm	+11% TL 70 (DT)
Width declared	78.9 in · 2,005 mm	76.8 in · 1,950 mm	—
Height declared	97.4 in · 2,475 mm	96.5 in · 2,450 mm	—
Ground clearance declared	15.0 in · 380 mm	19.3 in · 490 mm	+29% MF 4325 (A)
Turning radius, braked declared	12.0 ft · 3.65 m	—	—
Fuel tank declared	121.5 qt · 115.0 L	88.8 qt · 84.0 L	+37% TL 70 (DT)

Source

Source