Fiat TL 70 (DT) vs Hürlimann H-466 (A)

9 material differences · fewer than 12

Tractor one

from 1998

No measured PTO figure

Tractor two

1983–1986

No measured PTO figure

Which should you choose?

Read our verdict on the TL 70 (DT) and the H-466 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat TL 70 (DT) and Hürlimann H-466 (A), field by field
Field	TL 70 (DT)	H-466 (A)	Gap
Engine
Engine power, claimed claimed	64.1 hp	64.1 hp	—
Engine declared	New Holland-Iveco 8045.06 R	Hürlimann H-916.4 W	differs
Displacement declared	3.61 L	3.66 L	—
Maximum torque declared	170 lb·ft · 231 N·m	174 lb·ft · 236 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry LuK double clutch	Pedal-operated dry SLH single-disc clutch as driving clutch	differs
Hydraulics & hitch
Pump flow declared	11.8 gpm · 44.5 L/min	—	—
Pressure declared	2,103 psi · 145 bar	—	—
Three-point lift at ends declared	6,261 lb · 2,840 kg	5,058 lb · 2,294 kg	+24% TL 70 (DT)
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,149 lb · 4,150 kg	6,261 lb · 2,840 kg	+46% TL 70 (DT)
Maximum permissible mass declared	11,464 lb · 5,200 kg	—	—
Wheelbase declared	92.2 in · 2,342 mm	92.9 in · 2,360 mm	—
Length declared	168.5 in · 4,280 mm	159.4 in · 4,050 mm	+6% TL 70 (DT)
Width declared	78.9 in · 2,005 mm	80.7 in · 2,050 mm	—
Height declared	97.4 in · 2,475 mm	98.0 in · 2,490 mm	—
Ground clearance declared	15.0 in · 380 mm	16.1 in · 410 mm	+8% H-466 (A)
Turning radius, braked declared	12.0 ft · 3.65 m	—	—
Fuel tank declared	121.5 qt · 115.0 L	74.0 qt · 70.0 L	+64% TL 70 (DT)

Source

Source