Fiat TL 100 (DT) vs VALMET 6400-4

8 material differences · fewer than 12

Tractor one

1998–2004

No measured PTO figure

Tractor two

1991–2007

No measured PTO figure

Which should you choose?

Read our verdict on the TL 100 (DT) and the 6400-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Fiat TL 100 (DT) and VALMET 6400-4, field by field
Field	TL 100 (DT)	6400-4	Gap
Engine
Engine power, claimed claimed	93.7 hp	93.7 hp	—
Engine declared	New Holland-Iveco 8045.25 K	VALMET 420 DS/420 DW/420 DWRE/44 ET	differs
Displacement declared	3.91 L	4.40 L	+13% 6400-4
Maximum torque declared	245 lb·ft · 332 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated dry single-plate clutch	—
Hydraulics & hitch
Pump flow declared	15.9 gpm · 60.0 L/min	18.0 gpm · 68.2 L/min	+14% 6400-4
Pressure declared	2,103 psi · 145 bar	—	—
Three-point lift at ends declared	8,554 lb · 3,880 kg	—	—
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,623 lb · 4,365 kg	9,259 lb · 4,200 kg	—
Maximum permissible mass declared	13,228 lb · 6,000 kg	16,535 lb · 7,500 kg	+25% 6400-4
Wheelbase declared	92.2 in · 2,342 mm	91.6 in · 2,326 mm	—
Length declared	174.4 in · 4,430 mm	173.5 in · 4,408 mm	—
Width declared	79.1 in · 2,009 mm	78.1 in · 1,985 mm	—
Height declared	100.4 in · 2,550 mm	107.7 in · 2,735 mm	+7% 6400-4
Ground clearance declared	17.3 in · 440 mm	18.1 in · 460 mm	—
Turning radius, braked declared	12.0 ft · 3.65 m	13.8 ft · 4.20 m	+15% 6400-4
Fuel tank declared	121.5 qt · 115.0 L	174.4 qt · 165.0 L	+43% 6400-4

Source

Source