Fiat M 115 vs New Holland T 6050 Delta

11 material differences · fewer than 12

Tractor one

1996–1999

No measured PTO figure

Tractor two

2007–2012

No measured PTO figure

Which should you choose?

Read our verdict on the M 115 and the T 6050 Delta → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat M 115 and New Holland T 6050 Delta, field by field
Field	M 115	T 6050 Delta	Gap
Engine
Engine power, claimed claimed	113.5 hp	124.3 hp	+10% T 6050 Delta
Engine declared	NEW HOLLAND 675-TD	IVECO-NEF F 4 GE 9684 (TIER-III)	differs
Displacement declared	7.48 L	6.73 L	+11% M 115
Maximum torque declared	330 lb·ft · 447 N·m	435 lb·ft · 590 N·m	+32% T 6050 Delta
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	24.6 gpm · 93.3 L/min	17.1 gpm · 64.8 L/min	+44% M 115
Pressure declared	2,799 psi · 193 bar	—	—
Three-point lift at ends declared	12,655 lb · 5,740 kg	13,221 lb · 5,997 kg	—
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,662 lb · 5,290 kg	11,530 lb · 5,230 kg	—
Maximum permissible mass declared	17,637 lb · 8,000 kg	19,842 lb · 9,000 kg	+13% T 6050 Delta
Wheelbase declared	107.2 in · 2,723 mm	104.4 in · 2,652 mm	—
Length declared	183.4 in · 4,658 mm	194.9 in · 4,950 mm	+6% T 6050 Delta
Width declared	84.1 in · 2,135 mm	89.8 in · 2,280 mm	+7% T 6050 Delta
Height declared	111.2 in · 2,824 mm	110.4 in · 2,805 mm	—
Ground clearance declared	14.2 in · 360 mm	18.8 in · 478 mm	+33% T 6050 Delta
Fuel tank declared	232.5 qt · 220.0 L	186.0 qt · 176.0 L	+25% M 115

Source

Source