Fiat L 95 (DT) vs International Harvester 3288

14 material differences

Tractor one

1996–1998

No measured PTO figure

Tractor two

1981–1985

No measured PTO figure

Which should you choose?

Read our verdict on the L 95 (DT) and the 3288 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 1 fields identical or within 5%, which is not counted as material

Fiat L 95 (DT) and International Harvester 3288, field by field
Field	L 95 (DT)	3288	Gap
Engine
Engine power, claimed claimed	93.7 hp	89.7 hp	—
Engine declared	Fiat-Iveco 8045.25 K	INTERNATIONAL HARVESTER D-358	differs
Displacement declared	3.91 L	5.87 L	+50% 3288
Maximum torque declared	209 lb·ft · 284 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Pedal operated ceramic clutch	—
Hydraulics & hitch
Pump flow declared	15.9 gpm · 60.0 L/min	15.0 gpm · 56.8 L/min	+6% L 95 (DT)
Pressure declared	2,103–2,466 psi · 145–170 bar	—	—
Three-point lift at ends declared	9,259 lb · 4,200 kg	6,704 lb · 3,041 kg	+38% L 95 (DT)
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,496 lb · 3,400 kg	11,759 lb · 5,334 kg	+57% 3288
Maximum permissible mass declared	13,228 lb · 6,000 kg	—	—
Wheelbase declared	92.2 in · 2,342 mm	104.8 in · 2,662 mm	+14% 3288
Length declared	157.5 in · 4,000 mm	184.0 in · 4,674 mm	+17% 3288
Width declared	79.5 in · 2,020 mm	102.0 in · 2,591 mm	+28% 3288
Height declared	100.4 in · 2,550 mm	112.0 in · 2,845 mm	+12% 3288
Ground clearance declared	19.7 in · 500 mm	13.0 in · 330 mm	+52% L 95 (DT)
Turning radius, braked declared	13.9 ft · 4.25 m	11.9 ft · 3.63 m	+17% L 95 (DT)
Fuel tank declared	121.5 qt · 115.0 L	200.0 qt · 189.3 L	+65% 3288

Source

Source