Fiat L 75 (DT) or Renault Ceres 340 (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the L 75 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Ceres 340 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat L 75 (DT) and Renault Ceres 340 (A), with the call on each
QuestionL 75 (DT)Ceres 340 (A)Call
Which puts more power through the PTO shaft?62.6 kW (83.9 hp)Traktorenlexikon, “Fiatagri L85”62.6 kW (83.9 hp)Traktorenlexikon, “Renault Ceres 340”Not comparableNot comparable on power at the PTO shaft: the L 75 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Ceres 340 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the L 75 (DT) and the Ceres 340 (A).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the L 75 (DT) and the Ceres 340 (A).
Which pumps more oil for implements?44.5 L/min (11.8 gpm)Traktorenlexikon, “Fiatagri L85”—No figureNo call on hydraulic flow: no figure on record for the Ceres 340 (A).
Which lifts more on the three-point hitch?—5,210 kg (11,486 lb)Traktorenlexikon, “Renault Ceres 340”No figureNo call on three-point lift: no figure on record for the L 75 (DT).
Which is heavier, for traction?4,270 kg (9,414 lb)Traktorenlexikon, “Fiatagri L85”3,535 kg (7,793 lb)Traktorenlexikon, “Renault Ceres 340”Ahead (a fact, not an advantage)The Fiat L 75 (DT) is 21% heavier (735 kg / 1,620 lb) than the Renault Ceres 340 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?5,800 kg (12,787 lb)Traktorenlexikon, “Fiatagri L85”5,735 kg (12,644 lb)Traktorenlexikon, “Renault Ceres 340”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?12 to 24Traktorenlexikon, “Fiatagri L85”18 to 20Traktorenlexikon, “Renault Ceres 340”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the L 75 (DT) and the Ceres 340 (A).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri L85”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Renault Ceres 340”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Fiatagri L85”540/1000 rpmTraktorenlexikon, “Renault Ceres 340”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Renault Ceres 340”No figureNo call on PTO independence: not stated for the L 75 (DT).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri L85”Two-wheel or four-wheel driveTraktorenlexikon, “Renault Ceres 340”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1996–19981998–2001EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fiat L 75 (DT) is 21% heavier (735 kg / 1,620 lb) than the Renault Ceres 340 (A) (both unladen weight, as stated by the source).
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the L 75 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Ceres 340 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources