9 material differences · fewer than 12

Tractor oneFiat L 75 (DT)1996–1998No measured PTO figureTractor twoRenault Ceres 340 (A)1998–2001No measured PTO figure

Which should you choose?

Read our verdict on the L 75 (DT) and the Ceres 340 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat L 75 (DT) and Renault Ceres 340 (A), field by field
Field	L 75 (DT)	Ceres 340 (A)	Gap
Engine
Engine power, claimed claimed	83.9 hp	83.9 hp	—
Engine declared	Fiat-Iveco 8045.25	JOHN DEERE 4039 TRT 35	differs
Displacement declared	3.91 L	3.92 L	—
Maximum torque declared	217 lb·ft · 294 N·m	219 lb·ft · 297 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Dry LuK double clutch type 310/330	—
Hydraulics & hitch
Pump flow declared	11.8 gpm · 44.5 L/min	—	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,414 lb · 4,270 kg	7,793 lb · 3,535 kg	+21% L 75 (DT)
Maximum permissible mass declared	12,787 lb · 5,800 kg	12,644 lb · 5,735 kg	—
Wheelbase declared	92.2 in · 2,342 mm	97.2 in · 2,470 mm	+5% Ceres 340 (A)
Length declared	157.5 in · 4,000 mm	168.5 in · 4,280 mm	+7% Ceres 340 (A)
Width declared	79.5–105.7 in · 2,020–2,685 mm	83.1 in · 2,110 mm	differs
Height, over the cab declared	100.4 in · 2,550 mm	108.7 in · 2,760 mm	+8% Ceres 340 (A)
Ground clearance declared	19.7 in · 500 mm	19.3 in · 490 mm	—
Turning radius, braked declared	11.5 ft · 3.50 m	13.6 ft · 4.15 m	+19% Ceres 340 (A)
Fuel tank declared	121.5 qt · 115.0 L	147.9 qt · 140.0 L	+22% Ceres 340 (A)

Source

Source