2 material differences · fewer than 12
Tractor oneFiat L 75 (DT)1996–1998No measured PTO figureTractor twoNew Holland 6635 (A)1996–1998No measured PTO figure
Which should you choose?
Read our verdict on the L 75 (DT) and the 6635 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
2 material differences · 14 fields identical or within 5%, which is not counted as material
| Field | L 75 (DT) | 6635 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 83.9 hp | 83.9 hp | — |
| Engine declared | Fiat-Iveco 8045.25 | Iveco 8045.25 | differs |
| Displacement declared | 3.91 L | 3.91 L | — |
| Maximum torque declared | 217 lb·ft · 294 N·m | 217 lb·ft · 294 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Hydraulics & hitch | |||
| Pump flow declared | 11.8 gpm · 44.5 L/min | 11.8 gpm · 44.5 L/min | — |
| Pressure declared | — | 2,103–2,466 psi · 145–170 bar | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,414 lb · 4,270 kg | 9,414 lb · 4,270 kg | — |
| Maximum permissible mass declared | 12,787 lb · 5,800 kg | 12,787 lb · 5,800 kg | — |
| Wheelbase declared | 92.2 in · 2,342 mm | 92.2 in · 2,342 mm | — |
| Length declared | 157.5 in · 4,000 mm | 157.5 in · 4,000 mm | — |
| Width declared | 79.5–105.7 in · 2,020–2,685 mm | 79.5–105.7 in · 2,020–2,685 mm | — |
| Height, over the cab declared | 100.4 in · 2,550 mm | 100.4 in · 2,550 mm | — |
| Ground clearance declared | 19.7 in · 500 mm | 19.7 in · 500 mm | — |
| Turning radius, braked declared | 11.5 ft · 3.50 m | 11.5 ft · 3.50 m | — |
| Fuel tank declared | 121.5 qt · 115.0 L | 121.5 qt · 115.0 L | — |
Fiat L 75 (DT) sources
Source
- Source: Traktorenlexikon, “Fiatagri L85”
New Holland 6635 (A) sources
Source
- Source: Traktorenlexikon, “New Holland 6635”