Fiat L 75 (DT) or John Deere 2700 (A)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the L 75 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2700 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The John Deere 2700 (A) suits road haulage better on this data: 29% (1,700 kg / 3,748 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | L 75 (DT) | 2700 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 62.6 kW (83.9 hp)Traktorenlexikon, “Fiatagri L85” | 62.6 kW (83.9 hp)Traktorenlexikon, “John Deere 2700” | Not comparableNot comparable on power at the PTO shaft: the L 75 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2700 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the L 75 (DT) and the 2700 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the L 75 (DT) and the 2700 (A). |
| Which pumps more oil for implements? | 44.5 L/min (11.8 gpm)Traktorenlexikon, “Fiatagri L85” | 46.7 L/min (12.3 gpm)Traktorenlexikon, “John Deere 2700” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | — | 4,420 kg (9,744 lb)Traktorenlexikon, “John Deere 2700” | No figureNo call on three-point lift: no figure on record for the L 75 (DT). |
| Which is heavier, for traction? | 4,270 kg (9,414 lb)Traktorenlexikon, “Fiatagri L85” | 3,785 kg (8,344 lb)Traktorenlexikon, “John Deere 2700” | Ahead (a fact, not an advantage)The Fiat L 75 (DT) is 13% heavier (485 kg / 1,069 lb) than the John Deere 2700 (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 5,800 kg (12,787 lb)Traktorenlexikon, “Fiatagri L85” | 7,500 kg (16,535 lb)Traktorenlexikon, “John Deere 2700” | AheadThe John Deere 2700 (A) has 29% higher maximum permissible mass (1,700 kg / 3,748 lb) than the Fiat L 75 (DT) (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 12 to 24Traktorenlexikon, “Fiatagri L85” | 18Traktorenlexikon, “John Deere 2700” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the L 75 (DT) and the 2700 (A). |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri L85” | 30 km/h (18.6 mph) to 35 km/h (21.7 mph)Traktorenlexikon, “John Deere 2700” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Fiatagri L85” | 540/1000 rpmTraktorenlexikon, “John Deere 2700” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “John Deere 2700” | No figureNo call on PTO independence: not stated for the L 75 (DT). |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri L85” | Two-wheel or four-wheel driveTraktorenlexikon, “John Deere 2700” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1996–1998 | 1993–1996 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Fiat L 75 (DT) is 13% heavier (485 kg / 1,069 lb) than the John Deere 2700 (A) (both unladen weight, as stated by the source).
- The John Deere 2700 (A) has 29% higher maximum permissible mass (1,700 kg / 3,748 lb) than the Fiat L 75 (DT) (both maximum permissible mass, as stated by the source).
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the L 75 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2700 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources