9 material differences · fewer than 12

Tractor oneFiat L 75 (DT)1996–1998No measured PTO figureTractor twoJohn Deere 2700 (A)1993–1996No measured PTO figure

Which should you choose?

Read our verdict on the L 75 (DT) and the 2700 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat L 75 (DT) and John Deere 2700 (A), field by field
Field	L 75 (DT)	2700 (A)	Gap
Engine
Engine power, claimed claimed	83.9 hp	83.9 hp	—
Engine declared	Fiat-Iveco 8045.25	ZETOR 1201	differs
Displacement declared	3.91 L	4.16 L	+6% 2700 (A)
Maximum torque declared	217 lb·ft · 294 N·m	219 lb·ft · 297 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–21.7 mph · 30–35 km/h	differs
Clutch declared	—	Pedal-operated dry ZETOR single-disc clutch	—
Hydraulics & hitch
Pump flow declared	11.8 gpm · 44.5 L/min	12.3 gpm · 46.7 L/min	—
Pressure declared	—	2,350 psi · 162 bar	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,414 lb · 4,270 kg	8,344 lb · 3,785 kg	+13% L 75 (DT)
Maximum permissible mass declared	12,787 lb · 5,800 kg	16,535 lb · 7,500 kg	+29% 2700 (A)
Wheelbase declared	92.2 in · 2,342 mm	93.5 in · 2,375 mm	—
Length declared	157.5 in · 4,000 mm	165.0 in · 4,190 mm	—
Width declared	79.5–105.7 in · 2,020–2,685 mm	76.8–88.6 in · 1,950–2,250 mm	differs
Height, over the cab declared	100.4 in · 2,550 mm	103.9 in · 2,640 mm	—
Ground clearance declared	19.7 in · 500 mm	12.8 in · 325 mm	+54% L 75 (DT)
Turning radius, braked declared	11.5 ft · 3.50 m	—	—
Fuel tank declared	121.5 qt · 115.0 L	111.0 qt · 105.0 L	+10% L 75 (DT)

Source

Source