Fiat L 75 (DT) (Traktorenlexikon) vs VALMET 4600

15 material differences

Tractor one

1996–1998

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the L 75 (DT) and the 4600 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 2 fields identical or within 5%, which is not counted as material

Fiat L 75 (DT) (Traktorenlexikon) and VALMET 4600, field by field
Field	L 75 (DT)	4600	Gap
Engine
Engine power, claimed claimed	74.0 hp	78.9 hp	+7% 4600
Engine declared	Fiat-Iveco 8045.05 R	VALMET 420 D	differs
Displacement declared	3.91 L	4.40 L	+13% 4600
Maximum torque declared	162 lb·ft · 220 N·m	214 lb·ft · 290 N·m	+32% 4600
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry LuK double clutch	Dry double clutch	differs
Hydraulics & hitch
Pump flow declared	11.8 gpm · 44.5 L/min	10.3 gpm · 39.0 L/min	+14% L 75 (DT)
Pressure declared	2,466 psi · 170 bar	2,901 psi · 200 bar	+18% 4600
Three-point lift at ends declared	9,259 lb · 4,200 kg	6,294 lb · 2,855 kg	+47% L 75 (DT)
Rear PTO speeds declared	540/540E/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	9,237 lb · 4,190 kg	6,945 lb · 3,150 kg	+33% L 75 (DT)
Maximum permissible mass declared	11,905 lb · 5,400 kg	—	—
Wheelbase declared	92.2 in · 2,342 mm	94.0 in · 2,387 mm	—
Length declared	157.5 in · 4,000 mm	149.2 in · 3,790 mm	+6% L 75 (DT)
Width declared	79.5 in · 2,020 mm	81.5 in · 2,070 mm	—
Height declared	100.4 in · 2,550 mm	95.1 in · 2,415 mm	+6% L 75 (DT)
Ground clearance declared	18.9 in · 480 mm	17.1 in · 435 mm	+10% L 75 (DT)
Turning radius, braked declared	11.5 ft · 3.50 m	14.8 ft · 4.50 m	+29% 4600
Fuel tank declared	121.5 qt · 115.0 L	100.4 qt · 95.0 L	+21% L 75 (DT)

Source

Source