Fiat L 60 (DT) vs VALMET 355 (355/4)

15 material differences

Tractor one

1996–1998

No measured PTO figure

Tractor two

1990–1994

No measured PTO figure

Which should you choose?

Read our verdict on the L 60 (DT) and the 355 (355/4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 2 fields identical or within 5%, which is not counted as material

Fiat L 60 (DT) and VALMET 355 (355/4), field by field
Field	L 60 (DT)	355 (355/4)	Gap
Engine
Engine power, claimed claimed	59.3 hp	60.2 hp	—
Engine declared	Fiat-Iveco 8035.05	VALMET TD-33 D 3 or 320 D	differs
Displacement declared	2.93 L	3.30 L	+13% 355 (355/4)
Maximum torque declared	138 lb·ft · 187 N·m	146 lb·ft · 198 N·m	+6% 355 (355/4)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Dry LuK double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	11.8 gpm · 44.5 L/min	8.2 gpm · 31.0 L/min	+44% L 60 (DT)
Pressure declared	2,103 psi · 145 bar	4,206 psi · 290 bar	+100% 355 (355/4)
Three-point lift at ends declared	6,393 lb · 2,900 kg	5,688 lb · 2,580 kg	+12% L 60 (DT)
Rear PTO speeds declared	540/540E/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	8,686 lb · 3,940 kg	5,886 lb · 2,670 kg	+48% L 60 (DT)
Maximum permissible mass declared	11,464 lb · 5,200 kg	—	—
Wheelbase declared	92.2 in · 2,342 mm	83.1 in · 2,112 mm	+11% L 60 (DT)
Length declared	153.9 in · 3,910 mm	146.1 in · 3,710 mm	+5% L 60 (DT)
Width declared	83.5 in · 2,120 mm	77.4 in · 1,965 mm	+8% L 60 (DT)
Height declared	98.4 in · 2,500 mm	96.9 in · 2,460 mm	—
Ground clearance declared	18.9 in · 480 mm	15.9 in · 405 mm	+19% L 60 (DT)
Turning radius, braked declared	12.4 ft · 3.79 m	10.2 ft · 3.10 m	+22% L 60 (DT)
Fuel tank declared	121.5 qt · 115.0 L	77.1 qt · 73.0 L	+58% L 60 (DT)

Source

Source