Fiat G 190 vs John Deere 8110 T

12 material differences

Tractor one

1993–2002

No measured PTO figure

Tractor two

2000–2002

No measured PTO figure

Which should you choose?

Read our verdict on the G 190 and the 8110 T → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat G 190 and John Deere 8110 T, field by field
Field	G 190	8110 T	Gap
Engine
Engine power, claimed claimed	187.5 hp	192.4 hp	—
Engine declared	New Holland TA 456 CID/TC	John Deere-PowerTech 6.081 HRW	differs
Displacement declared	7.49 L	8.13 L	+9% 8110 T
Maximum torque declared	632 lb·ft · 857 N·m	586 lb·ft · 794 N·m	+8% G 190
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Electro-hydraulically operated wet Funk multi-disc clutch	Pedal operated hydraulic wet John Deere multi-plate clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	33.3 gpm · 126.1 L/min	31.8 gpm · 120.4 L/min	—
Pressure declared	2,495 psi · 172 bar	3,379 psi · 233 bar	+35% 8110 T
Three-point lift at ends declared	21,760 lb · 9,870 kg	10,971 lb · 4,976 kg	+98% G 190
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	19,286 lb · 8,748 kg	23,649 lb · 10,727 kg	+23% 8110 T
Maximum permissible mass declared	30,865 lb · 14,000 kg	31,500 lb · 14,288 kg	—
Wheelbase declared	122.6 in · 3,115 mm	89.0 in · 2,260 mm	+38% G 190
Length declared	213.6 in · 5,426 mm	216.0 in · 5,487 mm	—
Width declared	112.0 in · 2,845 mm	134.0 in · 3,404 mm	+20% 8110 T
Height declared	122.8 in · 3,118 mm	123.4 in · 3,135 mm	—
Ground clearance declared	20.0 in · 507 mm	14.2 in · 360 mm	+41% G 190
Fuel tank declared	439.6 qt · 416.0 L	519.9 qt · 492.0 L	+18% 8110 T

Source

Source