Fiat F-140 DT vs VALMET 8450 HiTech

7 material differences · fewer than 12

Tractor one

1993–1996

No measured PTO figure

Tractor two

1998–2003

No measured PTO figure

Which should you choose?

Read our verdict on the F-140 DT and the 8450 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 8 fields identical or within 5%, which is not counted as material

Fiat F-140 DT and VALMET 8450 HiTech, field by field
Field	F-140 DT	8450 HiTech	Gap
Engine
Engine power, claimed claimed	138 hp	138 hp	—
Engine declared	Fiat-Iveco 8065.25 S	VALMET 620 DWRE	differs
Displacement declared	5.86 L	6.59 L	+12% 8450 HiTech
Maximum torque declared	376 lb·ft · 510 N·m	454 lb·ft · 615 N·m	+21% 8450 HiTech
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	—	Pedal-operated, dry FICHTEL & SACHS single-plate clutch	—
Hydraulics & hitch
Pump flow declared	—	19.4 gpm · 73.6 L/min	—
Pressure declared	3,046 psi · 210 bar	3,046 psi · 210 bar	—
Three-point lift at ends declared	14,478 lb · 6,567 kg	15,212 lb · 6,900 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,379 lb · 5,615 kg	11,707 lb · 5,310 kg	+6% F-140 DT
Maximum permissible mass declared	18,960 lb · 8,600 kg	18,739 lb · 8,500 kg	—
Wheelbase declared	106.7 in · 2,710 mm	100.7 in · 2,558 mm	+6% F-140 DT
Length declared	187.4 in · 4,760 mm	194.4 in · 4,937 mm	—
Width declared	94.5 in · 2,400 mm	92.7 in · 2,355 mm	—
Height declared	111.4 in · 2,830 mm	109.8 in · 2,790 mm	—
Ground clearance declared	—	20.3 in · 515 mm	—
Fuel tank declared	232.5 qt · 220.0 L	174.4 qt · 165.0 L	+33% F-140 DT

Source

Source