10 material differences · fewer than 12
Tractor oneFiat 980 (DT)1979–1984No measured PTO figureTractor twoSAME Laser 100 (DT)1986–1991No measured PTO figure
Which should you choose?
Read our verdict on the 980 (DT) and the Laser 100 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 980 (DT) | Laser 100 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 96.7 hp | 96.7 hp | — |
| Engine declared | FIAT-IVECO 8065.02.217 | SAME 1055-P | differs |
| Displacement declared | 5.18 L | 5.20 L | — |
| Maximum torque declared | 237 lb·ft · 321 N·m | 242 lb·ft · 328 N·m | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | Pedal-operated dry SAME single-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 8.4 gpm · 31.8 L/min | 17.4 gpm · 66.0 L/min | +108% Laser 100 (DT) |
| Pressure declared | 3,263 psi · 225 bar | 1,740 psi · 120 bar | +88% 980 (DT) |
| Three-point lift, at the coupling points declared | 7,385 lb · 3,350 kg | 10,141 lb · 4,600 kg | +37% Laser 100 (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,628 lb · 3,460 kg | 8,686 lb · 3,940 kg | +14% Laser 100 (DT) |
| Wheelbase declared | 101.2 in · 2,570 mm | 103.0 in · 2,617 mm | — |
| Length declared | 152.2 in · 3,865 mm | 153.0 in · 3,885 mm | — |
| Width declared | 77.6 in · 1,970 mm | 77.0–101.1 in · 1,957–2,567 mm | differs |
| Ground clearance declared | 22.0 in · 560 mm | 20.7 in · 527 mm | +6% 980 (DT) |
| Turning radius, braked declared | 12.6 ft · 3.83 m | 11.0 ft · 3.35 m | +14% 980 (DT) |
| Fuel tank declared | 161.7 qt · 153.0 L | 126.8 qt · 120.0 L | +28% 980 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 980 (DT) sources
- Source: Traktorenlexikon, “Fiat 980 DT”
SAME Laser 100 (DT) sources
- Source: Traktorenlexikon, “SAME Laser 100”
- Source: Traktorenlexikon, “Lamborghini 955 DT”