8 material differences · fewer than 12
Tractor oneFiat 980 (DT)1979–1984No measured PTO figureTractor twoSAME Jaguar 100 (DT)1982–1984No measured PTO figure
Which should you choose?
Read our verdict on the 980 (DT) and the Jaguar 100 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 980 (DT) | Jaguar 100 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 96.7 hp | 96.7 hp | — |
| Engine declared | FIAT-IVECO 8065.02.217 | SAME DA 1055 P | differs |
| Displacement declared | 5.18 L | 5.19 L | — |
| Maximum torque declared | 237 lb·ft · 321 N·m | 263 lb·ft · 357 N·m | +11% Jaguar 100 (DT) |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 15.5–18.6 mph · 25–30 km/h | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.4 gpm · 31.8 L/min | 10.0 gpm · 38.0 L/min | +19% Jaguar 100 (DT) |
| Pressure declared | 3,263 psi · 225 bar | 2,698 psi · 186 bar | +21% 980 (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,628 lb · 3,460 kg | 7,959 lb · 3,610 kg | — |
| Wheelbase declared | 101.2 in · 2,570 mm | 98.4 in · 2,500 mm | — |
| Length declared | 152.2 in · 3,865 mm | 161.4 in · 4,100 mm | +6% Jaguar 100 (DT) |
| Width declared | 77.6 in · 1,970 mm | 82.7 in · 2,100 mm | +7% Jaguar 100 (DT) |
| Ground clearance declared | 22.0 in · 560 mm | 18.1 in · 460 mm | +22% 980 (DT) |
| Turning radius, braked declared | 12.6 ft · 3.83 m | 12.5 ft · 3.80 m | — |
| Fuel tank declared | 161.7 qt · 153.0 L | 126.8 qt · 120.0 L | +28% 980 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 980 (DT) sources
- Source: Traktorenlexikon, “Fiat 980 DT”
SAME Jaguar 100 (DT) sources
- Source: Traktorenlexikon, “SAME Jaguar 100”
- Source: Traktorenlexikon, “SAME Panther 95”