10 material differences · fewer than 12
Tractor oneFiat 980 (DT)1979–1984No measured PTO figureTractor twoRenault 981-4 (S)1977–1982No measured PTO figure
Which should you choose?
Read our verdict on the 980 (DT) and the 981-4 (S) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 980 (DT) | 981-4 (S) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 96.7 hp | 96.7 hp | — |
| Engine declared | FIAT-IVECO 8065.02.217 | MWM D 227-6 | differs |
| Displacement declared | 5.18 L | 5.66 L | +9% 981-4 (S) |
| Maximum torque declared | 237 lb·ft · 321 N·m | 254 lb·ft · 344 N·m | +7% 981-4 (S) |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | — | — |
| Clutch declared | — | Dry LuK double clutch, pedal-operated driving clutch and hand lever-operated PTO clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.4 gpm · 31.8 L/min | 8.7 gpm · 32.8 L/min | — |
| Pressure declared | 3,263 psi · 225 bar | 2,321 psi · 160 bar | +41% 980 (DT) |
| Three-point lift, at the coupling points declared | 7,385 lb · 3,350 kg | 8,620 lb · 3,910 kg | +17% 981-4 (S) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,628 lb · 3,460 kg | 9,403 lb · 4,265 kg | +23% 981-4 (S) |
| Wheelbase declared | 101.2 in · 2,570 mm | 105.6 in · 2,683 mm | — |
| Length declared | 152.2 in · 3,865 mm | 174.9 in · 4,442 mm | +15% 981-4 (S) |
| Width declared | 77.6 in · 1,970 mm | 79.5–96.7 in · 2,020–2,455 mm | differs |
| Ground clearance declared | 22.0 in · 560 mm | 17.9 in · 455 mm | +23% 980 (DT) |
| Turning radius, braked declared | 12.6 ft · 3.83 m | — | — |
| Fuel tank declared | 161.7 qt · 153.0 L | 123.6 qt · 117.0 L | +31% 980 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 980 (DT) sources
- Source: Traktorenlexikon, “Fiat 980 DT”
Renault 981-4 (S) sources
- Source: Traktorenlexikon, “Renault 981-4 R7644”
- Source: Traktorenlexikon, “Renault 891 R7681”