8 material differences · fewer than 12
Tractor oneFiat 980 (DT)1979–1984No measured PTO figureTractor twoFiat F-100 DT1990–1996No measured PTO figure
Which should you choose?
Read our verdict on the 980 (DT) and the F-100 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 980 (DT) | F-100 DT | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 96.7 hp | 96.7 hp | — |
| Engine declared | FIAT-IVECO 8065.02.217 | FIAT-IVECO 8065.06.300 or 8065.05 A | differs |
| Displacement declared | 5.18 L | — | — |
| Maximum torque declared | 237 lb·ft · 321 N·m | 241 lb·ft · 327 N·m | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | pedal-operated hydraulic dry LUK single-plate clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.4 gpm · 31.8 L/min | — | — |
| Pressure declared | 3,263 psi · 225 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,628 lb · 3,460 kg | 10,582 lb · 4,800 kg | +39% F-100 DT |
| Maximum permissible mass declared | — | 16,535 lb · 7,500 kg | — |
| Wheelbase declared | 101.2 in · 2,570 mm | 106.0 in · 2,692 mm | — |
| Length declared | 152.2 in · 3,865 mm | 185.4 in · 4,710 mm | +22% F-100 DT |
| Width declared | 77.6 in · 1,970 mm | 83.1–106.3 in · 2,110–2,700 mm | differs |
| Ground clearance declared | 22.0 in · 560 mm | 19.9 in · 505 mm | +11% 980 (DT) |
| Turning radius, braked declared | 12.6 ft · 3.83 m | 16.0 ft · 4.87 m | +27% F-100 DT |
| Fuel tank declared | 161.7 qt · 153.0 L | 232.5 qt · 220.0 L | +44% F-100 DT |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 980 (DT) sources
- Source: Traktorenlexikon, “Fiat 980 DT”
Fiat F-100 DT sources
- Source: Traktorenlexikon, “Fiatagri F100 DT”