11 material differences · fewer than 12
Tractor oneFiat 880 (DT)1975–1980No measured PTO figureTractor twoMassey Ferguson MF 178 (A)1968–1971No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (40%); the drive differs (Two-wheel or four-wheel drive; 2WD); they were not built in overlapping years (1975–1980; 1968–1971). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
11 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 880 (DT) | MF 178 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 86.9 hp | 71 hp | +22% 880 (DT) |
| Engine declared | O.M.-FIAT CO-3/75 | Perkins A 4.248 | differs |
| Displacement declared | 4.56 L | 4.07 L | +12% 880 (DT) |
| Maximum torque declared | — | 206 lb·ft · 279 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% MF 178 (A) |
| Clutch declared | Dry Ferodo or LuK double clutch | Pedal-operated dry double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 4.3 gpm · 16.4 L/min | — |
| Pressure declared | — | 3,001 psi · 207 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,565 lb · 3,885 kg | 6,129 lb · 2,780 kg | +40% 880 (DT) |
| Maximum permissible mass declared | 12,897 lb · 5,850 kg | — | — |
| Wheelbase declared | 96.5 in · 2,450 mm | 84.0 in · 2,134 mm | +15% 880 (DT) |
| Length declared | 158.3 in · 4,020 mm | 135.8 in · 3,450 mm | +17% 880 (DT) |
| Width declared | 78.0 in · 1,980 mm | 78.0 in · 1,980 mm | — |
| Ground clearance declared | 21.7 in · 550 mm | 17.3 in · 440 mm | +25% 880 (DT) |
| Turning radius, braked declared | 12.4 ft · 3.79 m | 11.7 ft · 3.57 m | +6% 880 (DT) |
| Fuel tank declared | 112.0 qt · 106.0 L | 86.6 qt · 82.0 L | +29% 880 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 880 (DT) sources
- Source: Traktorenlexikon, “Fiat 880/880 DT”
Massey Ferguson MF 178 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 178”