Fiat 880-5 (DT) vs VALMET 755/755-4
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the 880-5 (DT) and the 755/755-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 880-5 (DT) | 755/755-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 86.9 hp | 88.8 hp | — |
| Engine declared | FIAT-IVECO 8055.04.200 | VALMET TD 44 D-7 | differs |
| Displacement declared | 4.58 L | 4.40 L | — |
| Maximum torque declared | 218 lb·ft · 296 N·m | 240 lb·ft · 325 N·m | +10% 755/755-4 |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Dry FERODO or LuK double clutch | Foot-operated dry single-disc clutch combined with wet turbo clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.9 gpm · 41.4 L/min | — | — |
| Pressure declared | 3,263 psi · 225 bar | 3,191 psi · 220 bar | — |
| Three-point lift at ends declared | 6,261 lb · 2,840 kg | 9,921 lb · 4,500 kg | +58% 755/755-4 |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,157 lb · 3,700 kg | 8,289 lb · 3,760 kg | — |
| Wheelbase declared | 96.5 in · 2,451 mm | 93.9 in · 2,385 mm | — |
| Length declared | 144.5 in · 3,670 mm | 177.8 in · 4,515 mm | +23% 755/755-4 |
| Width declared | 77.6 in · 1,970 mm | 83.9 in · 2,130 mm | +8% 755/755-4 |
| Height declared | 100.8 in · 2,560 mm | 105.1 in · 2,670 mm | — |
| Ground clearance declared | 20.9 in · 530 mm | 18.7 in · 475 mm | +12% 880-5 (DT) |
| Turning radius, braked declared | 11.8 ft · 3.60 m | — | — |
| Fuel tank declared | 122.6 qt · 116.0 L | 190.2 qt · 180.0 L | +55% 755/755-4 |
Fiat 880-5 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 880 DT 5”
VALMET 755/755-4 sources
Source
- Source: Traktorenlexikon, “Valmet 755”