Fiat 880-5 (DT) vs Leyland 2100
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the 880-5 (DT) and the 2100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 880-5 (DT) | 2100 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 86.9 hp | 100.0 hp | +15% 2100 |
| Engine declared | FIAT-IVECO 8055.04.200 | LEYLAND-MOTORS 6/98 NT | differs |
| Displacement declared | 4.58 L | 5.66 L | +24% 2100 |
| Maximum torque declared | 218 lb·ft · 296 N·m | 276 lb·ft · 374 N·m | +26% 2100 |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Dry FERODO or LuK double clutch | Dry BORG & BECK double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.9 gpm · 41.4 L/min | 11.0 gpm · 41.6 L/min | — |
| Pressure declared | 3,263 psi · 225 bar | — | — |
| Three-point lift at ends declared | 6,261 lb · 2,840 kg | 6,030 lb · 2,735 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,157 lb · 3,700 kg | 8,911 lb · 4,042 kg | +9% 2100 |
| Wheelbase declared | 96.5 in · 2,451 mm | 90.0 in · 2,286 mm | +7% 880-5 (DT) |
| Length declared | 144.5 in · 3,670 mm | 150.0 in · 3,810 mm | — |
| Width declared | 77.6 in · 1,970 mm | 85.5 in · 2,172 mm | +10% 2100 |
| Height declared | 100.8 in · 2,560 mm | 98.8 in · 2,510 mm | — |
| Ground clearance declared | 20.9 in · 530 mm | 15.8 in · 402 mm | +32% 880-5 (DT) |
| Turning radius, braked declared | 11.8 ft · 3.60 m | 12.4 ft · 3.77 m | — |
| Fuel tank declared | 122.6 qt · 116.0 L | 72.1 qt · 68.2 L | +70% 880-5 (DT) |
Fiat 880-5 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 880 DT 5”
Leyland 2100 sources
Source
- Source: Traktorenlexikon, “Leyland 2100”