Fiat 880-5 (DT) vs International Harvester 3088
12 material differences
Which should you choose?
Read our verdict on the 880-5 (DT) and the 3088 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 880-5 (DT) | 3088 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 86.9 hp | 80.9 hp | +7% 880-5 (DT) |
| Engine declared | FIAT-IVECO 8055.04.200 | INTERNATIONAL HARVESTER D-358 | differs |
| Displacement declared | 4.58 L | 5.87 L | +28% 3088 |
| Maximum torque declared | 218 lb·ft · 296 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Dry FERODO or LuK double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 10.9 gpm · 41.4 L/min | 15.0 gpm · 56.8 L/min | +37% 3088 |
| Pressure declared | 3,263 psi · 225 bar | — | — |
| Three-point lift at ends declared | 6,261 lb · 2,840 kg | 6,704 lb · 3,041 kg | +7% 3088 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,157 lb · 3,700 kg | 11,940 lb · 5,416 kg | +46% 3088 |
| Wheelbase declared | 96.5 in · 2,451 mm | 104.8 in · 2,662 mm | +9% 3088 |
| Length declared | 144.5 in · 3,670 mm | 184.0 in · 4,674 mm | +27% 3088 |
| Width declared | 77.6 in · 1,970 mm | 102.0 in · 2,591 mm | +32% 3088 |
| Height declared | 100.8 in · 2,560 mm | 112.0 in · 2,845 mm | +11% 3088 |
| Ground clearance declared | 20.9 in · 530 mm | 13.0 in · 330 mm | +61% 880-5 (DT) |
| Turning radius, braked declared | 11.8 ft · 3.60 m | 11.9 ft · 3.63 m | — |
| Fuel tank declared | 122.6 qt · 116.0 L | 200.0 qt · 189.3 L | +63% 3088 |
Fiat 880-5 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 880 DT 5”
International Harvester 3088 sources
Source
- Source: Traktorenlexikon, “IHC 3088”
- Source: Traktorenlexikon, “IHC 786”