10 material differences · fewer than 12
Tractor oneFiat 850 (DT)1969–1975No measured PTO figureTractor twoInternational Harvester 7861980–1981No measured PTO figure
Which should you choose?
Read our verdict on the 850 (DT) and the 786 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 850 (DT) | 786 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 83.9 hp | 79.9 hp | — |
| Engine declared | O.M.-FIAT CO 3/80 Var.4 | INTERNATIONAL HARVESTER D-358 | differs |
| Displacement declared | 4.94 L | 5.87 L | +19% 786 |
| Maximum torque declared | 235 lb·ft · 318 N·m | 251 lb·ft · 340 N·m | +7% 786 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 786 |
| Clutch declared | Dry FERODO double clutch with separate PTO actuation | Pedal operated DYNA-LIFE clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 12.0 gpm · 45.5 L/min | — |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,330 lb · 3,325 kg | 11,590 lb · 5,257 kg | +58% 786 |
| Maximum permissible mass declared | 13,294 lb · 6,030 kg | — | — |
| Wheelbase declared | 93.0 in · 2,362 mm | 104.8 in · 2,662 mm | +13% 786 |
| Length declared | 159.5 in · 4,052 mm | 165.0 in · 4,191 mm | — |
| Width declared | 75.8–99.4 in · 1,925–2,525 mm | 102.0 in · 2,591 mm | differs |
| Ground clearance declared | 21.5 in · 545 mm | 13.0 in · 330 mm | +65% 850 (DT) |
| Turning radius, braked declared | 11.9 ft · 3.64 m | 11.9 ft · 3.63 m | — |
| Fuel tank declared | 89.8 qt · 85.0 L | 199.7 qt · 189.0 L | +122% 786 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 850 (DT) sources
- Source: Traktorenlexikon, “Fiat 850/850 DT”
International Harvester 786 sources
- Source: Traktorenlexikon, “IHC 786”