10 material differences · fewer than 12

Tractor oneFiat 850 (DT)1969–1975No measured PTO figureTractor twoHürlimann H-490 (A)1979–1983No measured PTO figure

Which should you choose?

We will not advise between these two machines, because they were not built in overlapping years (1969–1975; 1979–1983). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

10 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 850 (DT) and Hürlimann H-490 (A), field by field
Field850 (DT)H-490 (A)Gap
Engine
Engine power, claimed claimed83.9 hp88.8 hp+6% H-490 (A)
Engine declaredO.M.-FIAT CO 3/80 Var.4Hürlimann H-1104/8 or H-1104/8-Turbodiffers
Displacement declared4.94 L4.56 L+8% 850 (DT)
Maximum torque declared235 lb·ft · 318 N·m260 lb·ft · 352 N·m+11% H-490 (A)
Transmission
Top speed declared15.5 mph · 25 km/h15.5–18.6 mph · 25–30 km/hdiffers
Clutch declaredDry FERODO double clutch with separate PTO actuationDry SAME double clutchdiffers
Hydraulics & hitch
Pressure declared2,901 psi · 200 bar——
Rear PTO speeds declared540/1000 rpm540/1000 rpm—
Weight & dimensions
Unladen weight declared7,330 lb · 3,325 kg8,929–10,020 lb · 4,050–4,545 kgdiffers
Maximum permissible mass declared13,294 lb · 6,030 kg14,551 lb · 6,600 kg+9% H-490 (A)
Wheelbase declared93.0 in · 2,362 mm96.7 in · 2,457 mm—
Length declared159.5 in · 4,052 mm166.5 in · 4,230 mm—
Width declared75.8–99.4 in · 1,925–2,525 mm81.5–101.2 in · 2,070–2,570 mmdiffers
Ground clearance declared21.5 in · 545 mm13.8 in · 350 mm+56% 850 (DT)
Turning radius, braked declared11.9 ft · 3.64 m——
Fuel tank declared89.8 qt · 85.0 L169.1 qt · 160.0 L+88% H-490 (A)

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fiat 850 (DT) sources

Source
  • Source: Traktorenlexikon, “Fiat 850/850 DT”

Hürlimann H-490 (A) sources

Source
  • Source: Traktorenlexikon, “Hürlimann H 490”