9 material differences · fewer than 12
Tractor oneFiat 80-R1961–1967No measured PTO figureTractor twoJ.I. Case 941 GP1959–1969No measured PTO figure
Which should you choose?
Read our verdict on the 80-R and the 941 GP → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 80-R | 941 GP | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 82.9 hp | 83.0 hp | — |
| Engine declared | FIAT 604.000 | — | — |
| Displacement declared | 6.87 L | — | — |
| Maximum torque declared | 304 lb·ft · 412 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Pedal operated dry single plate clutch | Pedal-operated dry CASE single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.6 gpm · 40.0 L/min | 15.5 gpm · 58.7 L/min | +47% 941 GP |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,826 lb · 3,550 kg | 8,805 lb · 3,994 kg | +13% 941 GP |
| Wheelbase declared | 88.3 in · 2,242 mm | 108.0 in · 2,743 mm | +22% 941 GP |
| Length declared | 147.0 in · 3,734 mm | 162.0 in · 4,115 mm | +10% 941 GP |
| Width declared | 78.3 in · 1,988 mm | 85.2 in · 2,165 mm | +9% 941 GP |
| Ground clearance declared | 17.0 in · 432 mm | 17.0 in · 432 mm | — |
| Turning radius, braked declared | 13.9 ft · 4.25 m | 10.8 ft · 3.30 m | +29% 80-R |
| Fuel tank declared | 99.3 qt · 94.0 L | 95.9–120.0 qt · 90.8–113.6 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 80-R sources
Source
- Source: Traktorenlexikon, “Fiat 80 R”
J.I. Case 941 GP sources
Source
- Source: Traktorenlexikon, “Case 941”