Fiat 80-90 (DT) vs VALMET 865-2/865

10 material differences · fewer than 12

Tractor one

1984–1992

No measured PTO figure

Tractor two

1996–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 80-90 (DT) and the 865-2/865 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat 80-90 (DT) and VALMET 865-2/865, field by field
Field	80-90 (DT)	865-2/865	Gap
Engine
Engine power, claimed claimed	79.0 hp	86 hp	+9% 865-2/865
Engine declared	FIAT-IVECO 8045.05.205 or 305	VALMET 420 DSR	differs
Displacement declared	3.91 L	3.30 L	+18% 80-90 (DT)
Maximum torque declared	185 lb·ft · 251 N·m	229 lb·ft · 310 N·m	+24% 865-2/865
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	dry VALEO, O.M.G. or LuK double clutch	Dry Fichtel & Sachs double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	9.4 gpm · 35.5 L/min	15.1 gpm · 57.0 L/min	+61% 865-2/865
Pressure declared	3,046–3,118 psi · 210–215 bar	2,901 psi · 200 bar	differs
Three-point lift at ends declared	—	7,419 lb · 3,365 kg	—
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	6,834 lb · 3,100 kg	7,033 lb · 3,190 kg	—
Maximum permissible mass declared	11,684 lb · 5,300 kg	—	—
Wheelbase declared	92.2 in · 2,342 mm	88.3 in · 2,244 mm	—
Length declared	152.9 in · 3,884 mm	151.3 in · 3,842 mm	—
Width declared	76.0 in · 1,930 mm	80.3 in · 2,040 mm	+6% 865-2/865
Height declared	103.0 in · 2,615 mm	102.8 in · 2,610 mm	—
Ground clearance declared	19.9 in · 505 mm	18.3 in · 465 mm	+9% 80-90 (DT)
Turning radius, braked declared	12.0 ft · 3.65 m	11.8 ft · 3.60 m	—
Fuel tank declared	98.3 qt · 93.0 L	77.1 qt · 73.0 L	+27% 80-90 (DT)

Source

Source