Fiat 80-90 (DT) vs Leyland 282

11 material differences · fewer than 12

Tractor one

1984–1992

No measured PTO figure

Tractor two

1979–1981

No measured PTO figure

Which should you choose?

Read our verdict on the 80-90 (DT) and the 282 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat 80-90 (DT) and Leyland 282, field by field
Field	80-90 (DT)	282	Gap
Engine
Engine power, claimed claimed	79.0 hp	81.9 hp	—
Engine declared	FIAT-IVECO 8045.05.205 or 305	LEYLAND-MOTORS 4/98 TT	differs
Displacement declared	3.91 L	3.77 L	—
Maximum torque declared	185 lb·ft · 251 N·m	207 lb·ft · 281 N·m	+12% 282
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	dry VALEO, O.M.G. or LuK double clutch	Dry Borg and Beck double clutch	differs
Hydraulics & hitch
Pump flow declared	9.4 gpm · 35.5 L/min	8.0 gpm · 30.2 L/min	+18% 80-90 (DT)
Pressure declared	3,046–3,118 psi · 210–215 bar	—	—
Three-point lift at ends declared	—	5,199 lb · 2,358 kg	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,834 lb · 3,100 kg	6,795 lb · 3,082 kg	—
Maximum permissible mass declared	11,684 lb · 5,300 kg	—	—
Wheelbase declared	92.2 in · 2,342 mm	80.0 in · 2,032 mm	+15% 80-90 (DT)
Length declared	152.9 in · 3,884 mm	146.9 in · 3,730 mm	—
Width declared	76.0 in · 1,930 mm	80.3 in · 2,040 mm	+6% 282
Height declared	103.0 in · 2,615 mm	98.8 in · 2,510 mm	—
Ground clearance declared	19.9 in · 505 mm	15.8 in · 402 mm	+26% 80-90 (DT)
Turning radius, braked declared	12.0 ft · 3.65 m	10.7 ft · 3.27 m	+12% 80-90 (DT)
Fuel tank declared	98.3 qt · 93.0 L	72.1 qt · 68.2 L	+36% 80-90 (DT)

Source

Source