Fiat 80-66S/80-66 DTS vs John Deere 2400 (A)
10 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because their power is identical, with the same weight or the same engine, which usually means one machine sold under two names; any difference below comes from how each source describes it. The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
10 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 80-66S/80-66 DTS | 2400 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 79.0 hp | 73.1 hp | +8% 80-66S/80-66 DTS |
| Engine declared | Fiat 8045.05 | ZETOR 7301 | differs |
| Displacement declared | 3.91 L | 3.92 L | — |
| Maximum torque declared | 197 lb·ft · 267 N·m | 207 lb·ft · 281 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | Dry Zetor double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 9.1 gpm · 34.5 L/min | 10.6 gpm · 40.0 L/min | +16% 2400 (A) |
| Pressure declared | — | 1,160 psi · 80 bar | — |
| Three-point lift at ends declared | 7,859 lb · 3,565 kg | 8,863 lb · 4,020 kg | +13% 2400 (A) |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,919 lb · 2,685 kg | 7,055 lb · 3,200 kg | +19% 2400 (A) |
| Maximum permissible mass declared | 10,141 lb · 4,600 kg | 12,346 lb · 5,600 kg | +22% 2400 (A) |
| Wheelbase declared | 90.9 in · 2,310 mm | 88.8 in · 2,256 mm | — |
| Length declared | 150.4 in · 3,820 mm | 147.8 in · 3,755 mm | — |
| Width declared | 95.3 in · 2,420 mm | 73.8 in · 1,875 mm | +29% 80-66S/80-66 DTS |
| Height declared | 100.8 in · 2,560 mm | 104.9 in · 2,665 mm | — |
| Ground clearance declared | 16.1 in · 410 mm | 15.1 in · 383 mm | +7% 80-66S/80-66 DTS |
| Turning radius, braked declared | 12.0 ft · 3.65 m | — | — |
| Fuel tank declared | 77.1 qt · 73.0 L | 100.4 qt · 95.0 L | +30% 2400 (A) |
Fiat 80-66S/80-66 DTS sources
Source
- Source: Traktorenlexikon, “Fiatagri 80-66S/80-66 DTS”
John Deere 2400 (A) sources
Source
- Source: Traktorenlexikon, “John Deere 2400”