Fiat 766 (DT) or Massey Ferguson MF 590 (A)?

Which should you choose?

On performance, every comparable figure that differs favours the Fiat 766 (DT): three-point lift. On features, the Massey Ferguson MF 590 (A) is ahead on PTO speeds.

  • The Massey Ferguson MF 590 (A) suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
  • The Fiat 766 (DT) suits loader and hydraulic implement work better on this data: 23% (680 kg / 1,499 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 766 (DT) and Massey Ferguson MF 590 (A), with the call on each
Question766 (DT)MF 590 (A)Call
Which puts more power through the PTO shaft?47.2 kW (63.3 hp)Traktorenlexikon, “Fiat 766/766 DT”47.4 kW (63.6 hp)Traktorenlexikon, “Massey Ferguson MF 590 & 590A”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 766 (DT) and the MF 590 (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 766 (DT) and the MF 590 (A).
Which pumps more oil for implements?62.5 L/min (16.5 gpm)Traktorenlexikon, “Massey Ferguson MF 590 & 590A”No figureNo call on hydraulic flow: no figure on record for the 766 (DT).
Which lifts more on the three-point hitch?3,580 kg (7,893 lb)Traktorenlexikon, “Fiat 766/766 DT”2,900 kg (6,393 lb)Traktorenlexikon, “Massey Ferguson MF 590 & 590A”AheadThe Fiat 766 (DT) has 23% more lift (680 kg / 1,499 lb) than the Massey Ferguson MF 590 (A) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,730 kg (6,019 lb)Traktorenlexikon, “Fiat 766/766 DT”3,290 kg (7,253 lb)Traktorenlexikon, “Massey Ferguson MF 590 & 590A”Ahead (a fact, not an advantage)The Massey Ferguson MF 590 (A) is 21% heavier (560 kg / 1,235 lb) than the Fiat 766 (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 766 (DT) and the MF 590 (A).
Which has the wider choice of gears?12 to 20Traktorenlexikon, “Fiat 766/766 DT”8 to 12Traktorenlexikon, “Massey Ferguson MF 590 & 590A”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 766 (DT) and the MF 590 (A).
Which is faster on the road?25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Fiat 766/766 DT”25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 590 & 590A”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Fiat 766/766 DT”540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 590 & 590A”AheadThe Massey Ferguson MF 590 (A) offers 1000 rpm at the PTO, which the Fiat 766 (DT) does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiat 766/766 DT”independentTraktorenlexikon, “Massey Ferguson MF 590 & 590A”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 766/766 DT”2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 590 & 590A”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1984–19861976–1982Ahead (a fact, not an advantage)The Fiat 766 (DT) is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fiat 766 (DT) has 23% more lift (680 kg / 1,499 lb) than the Massey Ferguson MF 590 (A) (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson MF 590 (A) is 21% heavier (560 kg / 1,235 lb) than the Fiat 766 (DT) (both unladen weight, as stated by the source).
  • The Massey Ferguson MF 590 (A) offers 1000 rpm at the PTO, which the Fiat 766 (DT) does not (as stated by the sources).
  • The Fiat 766 (DT) is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources