Fiat 766 (DT) vs Massey Ferguson MF 590 (A)

9 material differences · fewer than 12

Tractor one

1984–1986

No measured PTO figure

Tractor two

1976–1982

No measured PTO figure

Which should you choose?

Read our verdict on the 766 (DT) and the MF 590 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 766 (DT) and Massey Ferguson MF 590 (A), field by field
Field	766 (DT)	MF 590 (A)	Gap
Engine
Engine power, claimed claimed	—	74.0 hp	—
Engine declared	FIAT-IVECO 8045.04.276 or 376	Perkins A 4.248 S	differs
Displacement declared	3.66 L	4.06 L	+11% MF 590 (A)
Maximum torque declared	193 lb·ft · 262 N·m	211 lb·ft · 285.5 N·m	+9% MF 590 (A)
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	15.5–18.6 mph · 25–30 km/h	—
Hydraulics & hitch
Pump flow declared	—	16.5 gpm · 62.5 L/min	—
Pressure declared	3,336–3,481 psi · 230–240 bar	—	—
Three-point lift at ends declared	7,893 lb · 3,580 kg	6,393 lb · 2,900 kg	+23% 766 (DT)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,019 lb · 2,730 kg	7,253 lb · 3,290 kg	+21% MF 590 (A)
Wheelbase declared	90.7 in · 2,305 mm	90.0 in · 2,286 mm	—
Length declared	142.6 in · 3,622 mm	153.0 in · 3,886 mm	+7% MF 590 (A)
Width declared	80.7 in · 2,050 mm	76.8 in · 1,950 mm	—
Height declared	95.9 in · 2,435 mm	100.0 in · 2,540 mm	—
Ground clearance declared	22.8 in · 580 mm	18.5 in · 470 mm	+23% 766 (DT)
Turning radius, braked declared	—	12.5 ft · 3.81 m	—
Fuel tank declared	77.1 qt · 73.0 L	103.8 qt · 98.2 L	+35% MF 590 (A)

Source

Source