Fiat 750-S (DT) or Landini R-8500 (DT) "TL 23 N/A"?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 750-S (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R-8500 (DT) "TL 23 N/A" has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Landini R-8500 (DT) "TL 23 N/A" suits road haulage better on this data: 25% (6.0 km/h / 3.7 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 750-S (DT) and Landini R-8500 (DT) "TL 23 N/A", with the call on each
Question750-S (DT)R-8500 (DT) "TL 23 N/A"Call
Which puts more power through the PTO shaft?58.8 kW (78.9 hp)Traktorenlexikon, “Fiat 750 S/750 S/DT”58.8 kW (78.9 hp)Traktorenlexikon, “Landini 8500”Not comparableNot comparable on power at the PTO shaft: the 750-S (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R-8500 (DT) "TL 23 N/A" has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 750-S (DT) and the R-8500 (DT) "TL 23 N/A".
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 750-S (DT) and the R-8500 (DT) "TL 23 N/A".
Which pumps more oil for implements?27.5 L/min (7.3 gpm)Traktorenlexikon, “Fiat 750 S/750 S/DT”26.7 L/min (7.1 gpm)Traktorenlexikon, “Landini 8500”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?2,100 kg (4,630 lb)Traktorenlexikon, “Fiat 750 S/750 S/DT”2,130 kg (4,696 lb)Traktorenlexikon, “Landini 8500”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?3,300 kg (7,275 lb)Traktorenlexikon, “Fiat 750 S/750 S/DT”2,610 kg (5,754 lb)Traktorenlexikon, “Landini 8500”Ahead (a fact, not an advantage)The Fiat 750-S (DT) is 26% heavier (690 kg / 1,521 lb) than the Landini R-8500 (DT) "TL 23 N/A" (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 750-S (DT) and the R-8500 (DT) "TL 23 N/A".
Which has the wider choice of gears?7 to 14Traktorenlexikon, “Fiat 750 S/750 S/DT”12Traktorenlexikon, “Landini 8500”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 750-S (DT) and the R-8500 (DT) "TL 23 N/A".
Which is faster on the road?24 km/h (14.9 mph)Traktorenlexikon, “Fiat 750 S/750 S/DT”30 km/h (18.6 mph)Traktorenlexikon, “Landini 8500”AheadThe Landini R-8500 (DT) "TL 23 N/A" has 25% more top speed (6.0 km/h / 3.7 mph) than the Fiat 750-S (DT) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Fiat 750 S/750 S/DT”540/1000 rpmTraktorenlexikon, “Landini 8500”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiat 750 S/750 S/DT”—No figureNo call on PTO independence: not stated for the R-8500 (DT) "TL 23 N/A".
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 750 S/750 S/DT”Two-wheel or four-wheel driveTraktorenlexikon, “Landini 8500”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1971–19751973–1983EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fiat 750-S (DT) is 26% heavier (690 kg / 1,521 lb) than the Landini R-8500 (DT) "TL 23 N/A" (both unladen weight, as stated by the source).
  • The Landini R-8500 (DT) "TL 23 N/A" has 25% more top speed (6.0 km/h / 3.7 mph) than the Fiat 750-S (DT) (both top speed forward, as stated by the source).
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 750-S (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R-8500 (DT) "TL 23 N/A" has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources