11 material differences · fewer than 12

Tractor oneFiat 750-S (DT)1971–1975No measured PTO figureTractor twoLandini R-8500 (DT) "TL 23 N/A"1973–1983No measured PTO figure

Which should you choose?

Read our verdict on the 750-S (DT) and the R-8500 (DT) "TL 23 N/A" → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

11 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat 750-S (DT) and Landini R-8500 (DT) "TL 23 N/A", field by field
Field750-S (DT)R-8500 (DT) "TL 23 N/A"Gap
Engine
Engine power, claimed claimed78.9 hp78.9 hp—
Engine declaredO.M.-FIAT CO 3/70Perkins A 4.248differs
Displacement declared4.56 L4.07 L+12% 750-S (DT)
Maximum torque declared231 lb·ft · 313 N·m213 lb·ft · 289 N·m+8% 750-S (DT)
Transmission
Top speed declared14.9 mph · 24 km/h18.6 mph · 30 km/h+25% R-8500 (DT) "TL 23 N/A"
Clutch declaredDry FEREDO double clutch, type 12/12"Dry LUK double clutchdiffers
Hydraulics & hitch
Pump flow declared7.3 gpm · 27.5 L/min7.1 gpm · 26.7 L/min—
Pressure declared2,843 psi · 196 bar——
Three-point lift, at the coupling points declared4,630 lb · 2,100 kg4,696 lb · 2,130 kg—
Rear PTO speeds declared540 rpm / 1000 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared7,275 lb · 3,300 kg5,754 lb · 2,610 kg+26% 750-S (DT)
Wheelbase declared96.1 in · 2,440 mm90.2 in · 2,290 mm+7% 750-S (DT)
Length declared140.2 in · 3,560 mm148.8 in · 3,780 mm+6% R-8500 (DT) "TL 23 N/A"
Width declared72.0 in · 1,830 mm73.6–98.0 in · 1,870–2,490 mmdiffers
Ground clearance declared20.5 in · 520 mm20.1 in · 510 mm—
Turning radius, braked declared12.5 ft · 3.80 m12.0 ft · 3.65 m—
Fuel tank declared85.6 qt · 81.0 L64.5 qt · 61.0 L+33% 750-S (DT)

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fiat 750-S (DT) sources

Source
  • Source: Traktorenlexikon, “Fiat 750 S/750 S/DT”
  • Source: Traktorenlexikon, “Someca 750”

Landini R-8500 (DT) "TL 23 N/A" sources

Source
  • Source: Traktorenlexikon, “Landini 8500”
  • Source: Traktorenlexikon, “Massey Ferguson MF 178”