6 material differences · fewer than 12
Tractor oneFiat 715 (DT)1966–1969No measured PTO figureTractor twoMassey Ferguson MF 1771965–1968No measured PTO figure
Which should you choose?
Read our verdict on the 715 (DT) and the MF 177 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 715 (DT) | MF 177 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 66.1 hp | 66.1 hp | — |
| Engine declared | O.M.-FIAT CO-2 D/70 | Perkins A 4.236 | differs |
| Displacement declared | — | 3.87 L | — |
| Maximum torque declared | — | 193 lb·ft · 262 N·m | — |
| Transmission | |||
| Top speed declared | 14.9 mph · 24 km/h | 12.4 mph · 20 km/h | +20% 715 (DT) |
| Clutch declared | Pedal operated dry FERODO double clutch | pedal-operated dry double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.0 gpm · 26.5 L/min | — | — |
| Pressure declared | 2,843 psi · 196 bar | 3,001 psi · 207 bar | +6% MF 177 |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,349 lb · 2,880 kg | 6,151 lb · 2,790 kg | — |
| Wheelbase declared | 86.6 in · 2,200 mm | 84.0 in · 2,134 mm | — |
| Length declared | 146.9 in · 3,730 mm | 139.4 in · 3,540 mm | +5% 715 (DT) |
| Width declared | 77.2 in · 1,960 mm | 75.2 in · 1,910 mm | — |
| Ground clearance declared | 18.1 in · 460 mm | 17.3 in · 440 mm | — |
| Turning radius, braked declared | 12.5 ft · 3.80 m | 11.7 ft · 3.57 m | +6% 715 (DT) |
| Fuel tank declared | 88.8 qt · 84.0 L | 86.6 qt · 82.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 715 (DT) sources
- Source: Traktorenlexikon, “Fiat 715/715 DT”
Massey Ferguson MF 177 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 177”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”