Fiat 715 (DT) vs John Deere 830
6 material differences · fewer than 12
Which should you choose?
Read our verdict on the 715 (DT) and the 830 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 715 (DT) | 830 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 66.1 hp | 69.6 hp | +5% 830 |
| Engine declared | O.M.-FIAT CO-2 D/70 | — | — |
| Transmission | |||
| Top speed declared | 14.9 mph · 24 km/h | 12.4 mph · 20.0 km/h | +20% 715 (DT) |
| Clutch declared | Pedal operated dry FERODO double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 7.0 gpm · 26.5 L/min | 8.9 gpm · 33.7 L/min | +27% 830 |
| Pressure declared | 2,843 psi · 196 bar | — | — |
| Three-point lift at ends declared | 4,960 lb · 2,250 kg | — | — |
| Rear PTO speeds declared | 540 rpm | 536 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,349 lb · 2,880 kg | 7,851 lb · 3,561 kg | +24% 830 |
| Wheelbase declared | 86.6 in · 2,200 mm | 85.2 in · 2,165 mm | — |
| Length declared | 146.9 in · 3,730 mm | 142.8 in · 3,626 mm | — |
| Width declared | 77.2 in · 1,960 mm | 79.5 in · 2,019 mm | — |
| Height declared | 60.2 in · 1,529 mm | 81.0 in · 2,057 mm | +35% 830 |
| Ground clearance declared | 18.1 in · 460 mm | — | — |
| Turning radius, braked declared | 12.5 ft · 3.80 m | 15.5 ft · 4.72 m | +24% 830 |
| Fuel tank declared | 88.8 qt · 84.0 L | — | — |
Fiat 715 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 715/715 DT”
John Deere 830 sources
Source
- Source: Traktorenlexikon, “John Deere Modell 830”