Fiat 70-66 F (DT/F) vs VALMET 565/II

13 material differences

Tractor one

1984–1991

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 70-66 F (DT/F) and the 565/II → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 1 fields identical or within 5%, which is not counted as material

Fiat 70-66 F (DT/F) and VALMET 565/II, field by field
Field	70-66 F (DT/F)	565/II	Gap
Engine
Engine power, claimed claimed	69.1 hp	74.0 hp	+7% 565/II
Engine declared	FIAT-IVECO 8045.06.206 or 306	VALMET 320 DS	differs
Displacement declared	3.61 L	3.30 L	+10% 70-66 F (DT/F)
Maximum torque declared	165 lb·ft · 224 N·m	203 lb·ft · 275 N·m	+23% 565/II
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Dry Valeo or LuK double clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	—	14.5 gpm · 55.0 L/min	—
Pressure declared	3,046 psi · 210 bar	2,901 psi · 200 bar	—
Three-point lift at ends declared	—	5,688 lb · 2,580 kg	—
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	4,277 lb · 1,940 kg	6,834 lb · 3,100 kg	+60% 565/II
Wheelbase declared	78.8 in · 2,001 mm	88.8 in · 2,255 mm	+13% 565/II
Length declared	121.7 in · 3,090 mm	152.4 in · 3,870 mm	+25% 565/II
Width declared	65.7 in · 1,670 mm	79.9 in · 2,030 mm	+22% 565/II
Height declared	53.7 in · 1,365 mm	104.5 in · 2,655 mm	+95% 565/II
Ground clearance declared	17.1 in · 435 mm	18.1 in · 460 mm	+6% 565/II
Turning radius, braked declared	—	13.8 ft · 4.20 m	—
Fuel tank declared	52.8 qt · 50.0 L	77.1 qt · 73.0 L	+46% 565/II

Source

Source