Fiat 70-66 (DT) vs VALMET 565/II

11 material differences · fewer than 12

Tractor one

1984–1991

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 70-66 (DT) and the 565/II → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 70-66 (DT) and VALMET 565/II, field by field
Field	70-66 (DT)	565/II	Gap
Engine
Engine power, claimed claimed	69.1 hp	74.0 hp	+7% 565/II
Engine declared	FIAT-IVECO 8045.06.206 or 306	VALMET 320 DS	differs
Displacement declared	3.61 L	3.30 L	+10% 70-66 (DT)
Maximum torque declared	165 lb·ft · 224 N·m	203 lb·ft · 275 N·m	+23% 565/II
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Dry LuK double clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	—	14.5 gpm · 55.0 L/min	—
Pressure declared	3,046 psi · 210 bar	2,901 psi · 200 bar	—
Three-point lift at ends declared	6,393 lb · 2,900 kg	5,688 lb · 2,580 kg	+12% 70-66 (DT)
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	5,864 lb · 2,660 kg	6,834 lb · 3,100 kg	+17% 565/II
Maximum permissible mass declared	10,141 lb · 4,600 kg	—	—
Wheelbase declared	90.7 in · 2,305 mm	88.8 in · 2,255 mm	—
Length declared	137.8 in · 3,500 mm	152.4 in · 3,870 mm	+11% 565/II
Width declared	75.2 in · 1,910 mm	79.9 in · 2,030 mm	+6% 565/II
Height declared	98.6 in · 2,505 mm	104.5 in · 2,655 mm	+6% 565/II
Ground clearance declared	21.9 in · 555 mm	18.1 in · 460 mm	+21% 70-66 (DT)
Turning radius, braked declared	11.3 ft · 3.45 m	13.8 ft · 4.20 m	+22% 565/II
Fuel tank declared	77.1 qt · 73.0 L	77.1 qt · 73.0 L	—

Source

Source