Fiat 70-66 (DT) vs International Harvester 785 (A)

11 material differences · fewer than 12

Tractor one

1984–1991

No measured PTO figure

Tractor two

1981–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 70-66 (DT) and the 785 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 70-66 (DT) and International Harvester 785 (A), field by field
Field	70-66 (DT)	785 (A)	Gap
Engine
Engine power, claimed claimed	69.1 hp	75.9 hp	+10% 785 (A)
Engine declared	FIAT-IVECO 8045.06.206 or 306	INTERNATIONAL-HARVESTER D-246	differs
Displacement declared	3.61 L	4.03 L	+12% 785 (A)
Maximum torque declared	165 lb·ft · 224 N·m	190 lb·ft · 258 N·m	+15% 785 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	—	Pedal-operated dry Laycock single-disc clutch	—
Hydraulics & hitch
Pressure declared	3,046 psi · 210 bar	2,698 psi · 186 bar	+13% 70-66 (DT)
Three-point lift at ends declared	6,393 lb · 2,900 kg	4,608 lb · 2,090 kg	+39% 70-66 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,864 lb · 2,660 kg	6,702 lb · 3,040 kg	+14% 785 (A)
Maximum permissible mass declared	10,141 lb · 4,600 kg	—	—
Wheelbase declared	90.7 in · 2,305 mm	88.2 in · 2,240 mm	—
Length declared	137.8 in · 3,500 mm	147.2 in · 3,740 mm	+7% 785 (A)
Width declared	75.2 in · 1,910 mm	75.6 in · 1,920 mm	—
Height declared	98.6 in · 2,505 mm	103.9 in · 2,640 mm	+5% 785 (A)
Ground clearance declared	21.9 in · 555 mm	15.6 in · 396 mm	+40% 70-66 (DT)
Turning radius, braked declared	11.3 ft · 3.45 m	11.5 ft · 3.51 m	—
Fuel tank declared	77.1 qt · 73.0 L	118.3 qt · 112.0 L	+53% 785 (A)

Source

Source