Fiat 70-56 LM (DT or Renault 75-34 MX?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 70-56 LM (DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 75-34 MX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Renault 75-34 MX suits loader and hydraulic implement work better on this data: 32% (10.6 L/min / 2.8 gpm) more hydraulic flow and 80% (2,030 kg / 4,475 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 70-56 LM (DT | 75-34 MX | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 51.5 kW (69.1 hp)Traktorenlexikon, “Fiatagri 70-56 LM (DT)” | 51.5 kW (69.1 hp)Traktorenlexikon, “Renault 75-34 ME/MA/MS/MX R3142” | Not comparableNot comparable on power at the PTO shaft: the 70-56 LM (DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 75-34 MX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 70-56 LM (DT and the 75-34 MX. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 70-56 LM (DT and the 75-34 MX. |
| Which pumps more oil for implements? | 32.8 L/min (8.7 gpm)Traktorenlexikon, “Fiatagri 70-56 LM (DT)” | 43.4 L/min (11.5 gpm)Traktorenlexikon, “Renault 75-34 ME/MA/MS/MX R3142” | AheadThe Renault 75-34 MX has 32% more hydraulic flow (10.6 L/min / 2.8 gpm) than the Fiat 70-56 LM (DT (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,540 kg (5,600 lb)Traktorenlexikon, “Fiatagri 70-56 LM (DT)” | 4,570 kg (10,075 lb)Traktorenlexikon, “Renault 75-34 ME/MA/MS/MX R3142” | AheadThe Renault 75-34 MX has 80% more lift (2,030 kg / 4,475 lb) than the Fiat 70-56 LM (DT (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,430 kg (5,357 lb)Traktorenlexikon, “Fiatagri 70-56 LM (DT)” | 3,670 kg (8,091 lb)Traktorenlexikon, “Renault 75-34 ME/MA/MS/MX R3142” | Ahead (a fact, not an advantage)The Renault 75-34 MX is 51% heavier (1,240 kg / 2,734 lb) than the Fiat 70-56 LM (DT (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 6,000 kg (13,228 lb)Traktorenlexikon, “Renault 75-34 ME/MA/MS/MX R3142” | No figureNo call on maximum permissible mass: no figure on record for the 70-56 LM (DT. |
| Which has the wider choice of gears? | 8 to 12Traktorenlexikon, “Fiatagri 70-56 LM (DT)” | 12 to 24Traktorenlexikon, “Renault 75-34 ME/MA/MS/MX R3142” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 70-56 LM (DT and the 75-34 MX. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Fiatagri 70-56 LM (DT)” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Renault 75-34 ME/MA/MS/MX R3142” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Fiatagri 70-56 LM (DT)” | 540/1000 rpmTraktorenlexikon, “Renault 75-34 ME/MA/MS/MX R3142” | AheadThe Renault 75-34 MX offers 1000 rpm at the PTO, which the Fiat 70-56 LM (DT does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Fiatagri 70-56 LM (DT)” | independentTraktorenlexikon, “Renault 75-34 ME/MA/MS/MX R3142” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri 70-56 LM (DT)” | 4WDTraktorenlexikon, “Renault 75-34 ME/MA/MS/MX R3142” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1988– | 1989–1993 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Renault 75-34 MX has 32% more hydraulic flow (10.6 L/min / 2.8 gpm) than the Fiat 70-56 LM (DT (both pump flow, as stated by the source).
- The Renault 75-34 MX has 80% more lift (2,030 kg / 4,475 lb) than the Fiat 70-56 LM (DT (both lift at the hitch ends, as stated by the source).
- The Renault 75-34 MX is 51% heavier (1,240 kg / 2,734 lb) than the Fiat 70-56 LM (DT (both unladen weight, as stated by the source).
- The Renault 75-34 MX offers 1000 rpm at the PTO, which the Fiat 70-56 LM (DT does not (as stated by the sources).
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 70-56 LM (DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 75-34 MX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources