14 material differences
Tractor oneFiat 70-56 LM (DTfrom 1988No measured PTO figureTractor twoRenault 75-34 MX1989–1993No measured PTO figure
Which should you choose?
Read our verdict on the 70-56 LM (DT and the 75-34 MX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
14 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 70-56 LM (DT | 75-34 MX | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 69.1 hp | — |
| Engine declared | Fiat 8045.06.206 or 307 | MWM D 226-4 | differs |
| Displacement declared | 3.61 L | 4.15 L | +15% 75-34 MX |
| Maximum torque declared | 164 lb·ft · 222 N·m | 177 lb·ft · 240 N·m | +8% 75-34 MX |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Dry LuK double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 8.7 gpm · 32.8 L/min | 11.5 gpm · 43.4 L/min | +32% 75-34 MX |
| Pressure declared | 3,046 psi · 210 bar | — | — |
| Three-point lift, at the coupling points declared | 5,600 lb · 2,540 kg | 10,075 lb · 4,570 kg | +80% 75-34 MX |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,357 lb · 2,430 kg | 8,091 lb · 3,670 kg | +51% 75-34 MX |
| Maximum permissible mass declared | — | 13,228 lb · 6,000 kg | — |
| Wheelbase declared | 86.7 in · 2,203 mm | 94.3 in · 2,394 mm | +9% 75-34 MX |
| Length declared | 143.3 in · 3,640 mm | 160.2 in · 4,070 mm | +12% 75-34 MX |
| Width declared | 71.7–91.3 in · 1,820–2,320 mm | 80.3 in · 2,040 mm | differs |
| Ground clearance declared | 19.7 in · 500 mm | 16.5 in · 420 mm | +19% 70-56 LM (DT |
| Turning radius, braked declared | 10.7 ft · 3.26 m | 16.4 ft · 5.00 m | +53% 75-34 MX |
| Fuel tank declared | 63.4 qt · 60.0 L | 121.5 qt · 115.0 L | +92% 75-34 MX |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 70-56 LM (DT sources
Source
- Source: Traktorenlexikon, “Fiatagri 70-56 LM (DT)”
Renault 75-34 MX sources
Source
- Source: Traktorenlexikon, “Renault 75-34 ME/MA/MS/MX R3142”
- Source: Traktorenlexikon, “Fendt Farmer 108 S/SA”