Fiat 70-56 LM (DT vs International Harvester Hydro 70

11 material differences · fewer than 12

Tractor one

from 1988

No measured PTO figure

Tractor two

1973–1976

No measured PTO figure

Which should you choose?

Read our verdict on the 70-56 LM (DT and the Hydro 70 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 2 fields identical or within 5%, which is not counted as material

Fiat 70-56 LM (DT and International Harvester Hydro 70, field by field
Field	70-56 LM (DT	Hydro 70	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	Fiat 8045.06.206 or 307	INTERNATIONAL HARVESTER C-291	differs
Displacement declared	3.61 L	—	—
Maximum torque declared	164 lb·ft · 222 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	21.1 mph · 34 km/h	+13% Hydro 70
Clutch declared	—	Pedal operated ceramic clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.7 gpm · 32.8 L/min	12.0 gpm · 45.5 L/min	+39% Hydro 70
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	5,600 lb · 2,540 kg	—	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	5,357 lb · 2,430 kg	8,439 lb · 3,828 kg	+58% Hydro 70
Wheelbase declared	86.7 in · 2,203 mm	103.0 in · 2,616 mm	+19% Hydro 70
Length declared	143.3 in · 3,640 mm	161.0 in · 4,089 mm	+12% Hydro 70
Width declared	71.7 in · 1,820 mm	87.0 in · 2,210 mm	+21% Hydro 70
Height declared	95.3 in · 2,420 mm	77.0 in · 1,956 mm	+24% 70-56 LM (DT
Ground clearance declared	19.7 in · 500 mm	21.0 in · 533 mm	+7% Hydro 70
Turning radius, braked declared	10.7 ft · 3.26 m	12.0 ft · 3.66 m	+12% Hydro 70
Fuel tank declared	63.4 qt · 60.0 L	123.9 qt · 117.3 L	+96% Hydro 70

Source

Source