Fiat 666 (DT) vs John Deere 2355 (A)

9 material differences · fewer than 12

Tractor one

1982–1986

No measured PTO figure

Tractor two

1987–1992

No measured PTO figure

Which should you choose?

Read our verdict on the 666 (DT) and the 2355 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 666 (DT) and John Deere 2355 (A), field by field
Field	666 (DT)	2355 (A)	Gap
Engine
Engine power, claimed claimed	67 hp	66.1 hp	—
Engine declared	FIAT-IVECO 8045.02.276 or 376	John Deere 4.239 DL-007 or DL-010	differs
Displacement declared	3.46 L	3.92 L	+13% 2355 (A)
Maximum torque declared	161 lb·ft · 218 N·m	—	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	—	14.7 gpm · 55.5 L/min	—
Three-point lift at ends declared	6,923 lb · 3,140 kg	—	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	5,688 lb · 2,580 kg	6,779 lb · 3,075 kg	+19% 2355 (A)
Wheelbase declared	90.7 in · 2,305 mm	89.7 in · 2,279 mm	—
Length declared	134.3 in · 3,412 mm	145.0 in · 3,683 mm	+8% 2355 (A)
Width declared	77.2 in · 1,960 mm	89.4 in · 2,270 mm	+16% 2355 (A)
Height declared	92.7 in · 2,355 mm	102.2 in · 2,595 mm	+10% 2355 (A)
Ground clearance declared	19.5 in · 495 mm	15.7 in · 400 mm	+24% 666 (DT)
Turning radius, braked declared	12.6 ft · 3.84 m	—	—
Fuel tank declared	77.1 qt · 73.0 L	88.8 qt · 84.0 L	+15% 2355 (A)

Source

Source