12 material differences
Tractor oneFiat 650-S (DT)1971–1974No measured PTO figureTractor twoJ.I. Case 1294 (DT)1984–1985No measured PTO figure
Which should you choose?
Read our verdict on the 650-S (DT) and the 1294 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 650-S (DT) | 1294 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 61.2 hp | +13% 650-S (DT) |
| Engine declared | O.M.-FIAT CN 3 | DAVID BROWN AD 4/55 | differs |
| Displacement declared | 3.71 L | 3.20 L | +16% 650-S (DT) |
| Maximum torque declared | 203 lb·ft · 275 N·m | 172 lb·ft · 233 N·m | +18% 650-S (DT) |
| Transmission | |||
| Top speed declared | 14.9 mph · 24 km/h | 18.6 mph · 30 km/h | +25% 1294 (DT) |
| Clutch declared | Dry FEREDO double clutch | Dry double clutch, type 11"/11" | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.6 gpm · 28.8 L/min | 7.2 gpm · 27.3 L/min | +5% 650-S (DT) |
| Pressure declared | 2,843 psi · 196 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,338 lb · 2,875 kg | 6,316 lb · 2,865 kg | — |
| Wheelbase declared | 91.3 in · 2,320 mm | 83.0 in · 2,108 mm | +10% 650-S (DT) |
| Length declared | 148.4 in · 3,770 mm | 135.0 in · 3,429 mm | +10% 650-S (DT) |
| Width declared | 69.3 in · 1,760 mm | 70.0 in · 1,778 mm | — |
| Ground clearance declared | 20.1 in · 510 mm | 15.0 in · 381 mm | +34% 650-S (DT) |
| Turning radius, braked declared | 12.0 ft · 3.65 m | 10.4 ft · 3.18 m | +15% 650-S (DT) |
| Fuel tank declared | 82.4 qt · 78.0 L | 105.7 qt · 100 L | +28% 1294 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 650-S (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 650 S/650 S/DT”
- Source: Traktorenlexikon, “Someca 650”
J.I. Case 1294 (DT) sources
Source
- Source: Traktorenlexikon, “Case 1294”
- Source: Traktorenlexikon, “Case 1390”