Fiat 65-94 DT vs Massey Ferguson MF 274 S (A)

12 material differences

Tractor one

1993–1996

No measured PTO figure

Tractor two

1982–1987

No measured PTO figure

Which should you choose?

Read our verdict on the 65-94 DT and the MF 274 S (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 65-94 DT and Massey Ferguson MF 274 S (A), field by field
Field	65-94 DT	MF 274 S (A)	Gap
Engine
Engine power, claimed claimed	—	64.1 hp	—
Engine declared	Fiat-Iveco 8045.06	Perkins A 4.236	differs
Displacement declared	3.61 L	3.87 L	+7% MF 274 S (A)
Maximum torque declared	162 lb·ft · 220 N·m	176 lb·ft · 239 N·m	+9% MF 274 S (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Dry Valeo or LuK double clutch	Pedal operated dry and air cooled double clutch	differs
Hydraulics & hitch
Pump flow declared	10.3 gpm · 39.0 L/min	7.7 gpm · 29.0 L/min	+34% 65-94 DT
Pressure declared	3,263–3,408 psi · 225–235 bar	—	—
Three-point lift at ends declared	6,393 lb · 2,900 kg	4,321 lb · 1,960 kg	+48% 65-94 DT
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,165 lb · 3,250 kg	6,305 lb · 2,860 kg	+14% 65-94 DT
Maximum permissible mass declared	11,684 lb · 5,300 kg	—	—
Wheelbase declared	92.1 in · 2,340 mm	86.2 in · 2,190 mm	+7% 65-94 DT
Length declared	134.3 in · 3,410 mm	143.7 in · 3,650 mm	+7% MF 274 S (A)
Width declared	80.3 in · 2,040 mm	76.0 in · 1,930 mm	+6% 65-94 DT
Height declared	99.6 in · 2,530 mm	103.1 in · 2,620 mm	—
Ground clearance declared	15.7 in · 400 mm	15.4 in · 390 mm	—
Turning radius, braked declared	—	11.2 ft · 3.40 m	—
Fuel tank declared	98.3 qt · 93.0 L	65.5 qt · 62 L	+50% 65-94 DT

Source

Source