Fiat 65-66 S (DT) vs Renault Ceres 75 (A)

10 material differences · fewer than 12

Tractor one

1992–1996

No measured PTO figure

Tractor two

1993–1995

No measured PTO figure

Which should you choose?

Read our verdict on the 65-66 S (DT) and the Ceres 75 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat 65-66 S (DT) and Renault Ceres 75 (A), field by field
Field	65-66 S (DT)	Ceres 75 (A)	Gap
Engine
Engine power, claimed claimed	64.1 hp	64.1 hp	—
Engine declared	Fiat 8045.06	Perkins LD 80442	differs
Displacement declared	3.61 L	3.86 L	+7% Ceres 75 (A)
Maximum torque declared	159 lb·ft · 216 N·m	176 lb·ft · 239 N·m	+11% Ceres 75 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Constant flow	—
Pump flow declared	9.1 gpm · 34.5 L/min	9.0 gpm · 34.1 L/min	—
Three-point lift at ends declared	6,614 lb · 3,000 kg	6,327 lb · 2,870 kg	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,206 lb · 2,815 kg	6,548 lb · 2,970 kg	+6% Ceres 75 (A)
Maximum permissible mass declared	9,259 lb · 4,200 kg	12,125 lb · 5,500 kg	+31% Ceres 75 (A)
Wheelbase declared	89.8 in · 2,280 mm	93.3 in · 2,369 mm	—
Length declared	147.2 in · 3,740 mm	155.2 in · 3,941 mm	+5% Ceres 75 (A)
Width declared	78.0 in · 1,980 mm	73.2 in · 1,860 mm	+6% 65-66 S (DT)
Height declared	96.5 in · 2,450 mm	99.2 in · 2,520 mm	—
Ground clearance declared	19.3 in · 490 mm	17.7 in · 450 mm	+9% 65-66 S (DT)
Turning radius, braked declared	—	12.5 ft · 3.80 m	—
Fuel tank declared	77.1 qt · 73.0 L	121.5 qt · 115.0 L	+58% Ceres 75 (A)

Source

Source