Fiat 615 (DT) vs SOMECA 670 (DT)
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the 615 (DT) and the 670 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 9 fields identical or within 5%, which is not counted as material
| Field | 615 (DT) | 670 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 64.1 hp | 64.1 hp | — |
| Engine declared | O.M.-FIAT CO 2 D/60 Var.10 or Var.12 | O.M.-FIAT CO 3/60 | differs |
| Displacement declared | 4.40 L | 4.56 L | — |
| Maximum torque declared | 188 lb·ft · 255 N·m | 207 lb·ft · 281 N·m | +10% 670 (DT) |
| Transmission | |||
| Top speed declared | 14.9 mph · 24 km/h | 14.9 mph · 24 km/h | — |
| Clutch declared | pedal operated two stage dry FERODO double clutch | Pedal-operated two-stage dry FEREDO double clutch type 11/10" | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.0 gpm · 26.5 L/min | 6.1 gpm · 23.2 L/min | +14% 615 (DT) |
| Pressure declared | 2,988 psi · 206 bar | 2,843 psi · 196 bar | — |
| Three-point lift at ends declared | 3,968 lb · 1,800 kg | 5,534 lb · 2,510 kg | +39% 670 (DT) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,997 lb · 2,720 kg | 6,041 lb · 2,740 kg | — |
| Wheelbase declared | 85.4 in · 2,170 mm | 91.2 in · 2,316 mm | +7% 670 (DT) |
| Length declared | 140.9 in · 3,580 mm | 142.3 in · 3,615 mm | — |
| Width declared | 71.7 in · 1,820 mm | 77.6 in · 1,970 mm | +8% 670 (DT) |
| Height declared | 66.5 in · 1,690 mm | 69.9 in · 1,775 mm | — |
| Ground clearance declared | 18.5 in · 470 mm | 13.4 in · 340 mm | +38% 615 (DT) |
| Turning radius, braked declared | 12.0 ft · 3.65 m | 12.9 ft · 3.93 m | +8% 670 (DT) |
| Fuel tank declared | 88.8 qt · 84.0 L | 84.5 qt · 80.0 L | — |
Fiat 615 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 615/615 DT”
SOMECA 670 (DT) sources
Source
- Source: Traktorenlexikon, “Someca 670”