Fiat 60-90 (DT) or Fiat 65-56 LM (DT)?

Which should you choose?

On performance, every comparable figure that differs favours the Fiat 60-90 (DT): three-point lift. It is also ahead on PTO speeds.

  • The Fiat 60-90 (DT) suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
  • The Fiat 60-90 (DT) suits loader and hydraulic implement work better on this data: 38% (670 kg / 1,477 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 60-90 (DT) and Fiat 65-56 LM (DT), with the call on each
Question60-90 (DT)65-56 LM (DT)Call
Which puts more power through the PTO shaft?39.7 kW (53.2 hp)Traktorenlexikon, “Fiatagri 60-90/60-90 DT”39.9 kW (53.5 hp)Traktorenlexikon, “Fiatagri 65-56 LM (DT)”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 60-90 (DT) and the 65-56 LM (DT).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 60-90 (DT) and the 65-56 LM (DT).
Which pumps more oil for implements?35.4 L/min (9.4 gpm)Traktorenlexikon, “Fiatagri 60-90/60-90 DT”32.8 L/min (8.7 gpm)Traktorenlexikon, “Fiatagri 65-56 LM (DT)”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?2,415 kg (5,324 lb)Traktorenlexikon, “Fiatagri 60-90/60-90 DT”1,745 kg (3,847 lb)Traktorenlexikon, “Fiatagri 65-56 LM (DT)”AheadThe Fiat 60-90 (DT) has 38% more lift (670 kg / 1,477 lb) than the Fiat 65-56 LM (DT) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,810 kg (6,195 lb)Traktorenlexikon, “Fiatagri 60-90/60-90 DT”2,270 kg (5,004 lb)Traktorenlexikon, “Fiatagri 65-56 LM (DT)”Ahead (a fact, not an advantage)The Fiat 60-90 (DT) is 24% heavier (540 kg / 1,190 lb) than the Fiat 65-56 LM (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?5,000 kg (11,023 lb)Traktorenlexikon, “Fiatagri 60-90/60-90 DT”No figureNo call on maximum permissible mass: no figure on record for the 65-56 LM (DT).
Which has the wider choice of gears?12 to 20Traktorenlexikon, “Fiatagri 60-90/60-90 DT”8 to 12Traktorenlexikon, “Fiatagri 65-56 LM (DT)”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 60-90 (DT) and the 65-56 LM (DT).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri 60-90/60-90 DT”30 km/h (18.6 mph)Traktorenlexikon, “Fiatagri 65-56 LM (DT)”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fiatagri 60-90/60-90 DT”540 rpmTraktorenlexikon, “Fiatagri 65-56 LM (DT)”AheadThe Fiat 60-90 (DT) offers 1000 rpm at the PTO, which the Fiat 65-56 LM (DT) does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiatagri 60-90/60-90 DT”independentTraktorenlexikon, “Fiatagri 65-56 LM (DT)”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri 60-90/60-90 DT”Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri 65-56 LM (DT)”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1984–19921988–EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fiat 60-90 (DT) has 38% more lift (670 kg / 1,477 lb) than the Fiat 65-56 LM (DT) (both lift at the hitch ends, as stated by the source).
  • The Fiat 60-90 (DT) is 24% heavier (540 kg / 1,190 lb) than the Fiat 65-56 LM (DT) (both unladen weight, as stated by the source).
  • The Fiat 60-90 (DT) offers 1000 rpm at the PTO, which the Fiat 65-56 LM (DT) does not (as stated by the sources).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources