Fiat 60-90 (DT) vs Fiat 65-56 LM (DT)

12 material differences

Tractor one

1984–1992

No measured PTO figure

Tractor two

from 1988

No measured PTO figure

Which should you choose?

Read our verdict on the 60-90 (DT) and the 65-56 LM (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat 60-90 (DT) and Fiat 65-56 LM (DT), field by field
Field	60-90 (DT)	65-56 LM (DT)	Gap
Engine
Engine power, claimed claimed	59.3 hp	64.1 hp	+8% 65-56 LM (DT)
Engine declared	FIAT-IVECO 8035.05.200 or 300	Fiat 8045.06.220 or 320	differs
Displacement declared	2.93 L	3.61 L	+23% 65-56 LM (DT)
Maximum torque declared	143 lb·ft · 194 N·m	151 lb·ft · 205 N·m	+6% 65-56 LM (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry Valeo, O.M.G. or LuK double clutch	Dry LuK or VALEO double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	9.4 gpm · 35.4 L/min	8.7 gpm · 32.8 L/min	+8% 60-90 (DT)
Pressure declared	3,046–3,118 psi · 210–215 bar	3,046 psi · 210 bar	—
Three-point lift at ends declared	5,324 lb · 2,415 kg	3,847 lb · 1,745 kg	+38% 60-90 (DT)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,195 lb · 2,810 kg	5,004 lb · 2,270 kg	+24% 60-90 (DT)
Maximum permissible mass declared	11,023 lb · 5,000 kg	—	—
Wheelbase declared	87.7 in · 2,227 mm	85.3 in · 2,167 mm	—
Length declared	147.0 in · 3,733 mm	141.7 in · 3,600 mm	—
Width declared	75.9 in · 1,929 mm	71.7 in · 1,820 mm	+6% 60-90 (DT)
Height declared	100.0 in · 2,540 mm	95.3 in · 2,420 mm	—
Ground clearance declared	17.5 in · 445 mm	18.9 in · 480 mm	+8% 65-56 LM (DT)
Turning radius, braked declared	11.2 ft · 3.40 m	11.5 ft · 3.51 m	—
Fuel tank declared	98.3 qt · 93.0 L	63.4 qt · 60.0 L	+55% 60-90 (DT)

Source

Source