Fiat 60-66 S (DT) vs John Deere 2100 (A)

11 material differences · fewer than 12

Tractor one

1992–1996

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 60-66 S (DT) and the 2100 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat 60-66 S (DT) and John Deere 2100 (A), field by field
Field	60-66 S (DT)	2100 (A)	Gap
Engine
Engine power, claimed claimed	59.3 hp	56 hp	—
Engine declared	Fiat 8035.05	ZETOR 6201	differs
Displacement declared	2.93 L	3.46 L	+18% 2100 (A)
Maximum torque declared	150 lb·ft · 203 N·m	148 lb·ft · 200 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Dry Zetor double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.1 gpm · 34.5 L/min	8.4 gpm · 31.8 L/min	+8% 60-66 S (DT)
Pressure declared	3,046 psi · 210 bar	1,160 psi · 80 bar	+163% 60-66 S (DT)
Three-point lift at ends declared	6,614 lb · 3,000 kg	6,393 lb · 2,900 kg	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,107 lb · 2,770 kg	6,581 lb · 2,985 kg	+8% 2100 (A)
Maximum permissible mass declared	9,259 lb · 4,200 kg	12,125 lb · 5,500 kg	+31% 2100 (A)
Wheelbase declared	85.8 in · 2,180 mm	88.8 in · 2,256 mm	—
Length declared	143.3 in · 3,640 mm	148.0 in · 3,760 mm	—
Width declared	78.0 in · 1,980 mm	70.9 in · 1,800 mm	+10% 60-66 S (DT)
Height declared	96.5 in · 2,450 mm	103.9 in · 2,640 mm	+8% 2100 (A)
Ground clearance declared	20.9 in · 530 mm	17.0 in · 432 mm	+23% 60-66 S (DT)
Fuel tank declared	77.1 qt · 73.0 L	74.0 qt · 70.0 L	—

Source

Source